자료유형
발행기관
- 한국탄소학회(175)
- 테크노프레스(23)
- 대한신경정신의학회(15)
- 대한기계학회(14)
- 대한수의학회(10)
- 인문사회과학기술융합학회(10)
- 한국식물병리학회(5)
- 한국고분자학회(4)
- 한국공작기계학회(4)
- 한국복합재료학회(4)
- 한국습지학회(4)
- 한국교육사회학회(3)
- 한국복합신소재구조학회(3)
- 한국열환경공학회(3)
- 한국지반공학회(3)
- 한국콘크리트학회(3)
- 한국해양공학회(3)
- 국민연금연구원(2)
- 대한생리학회-대한약리학회(2)
- 한국가스학회(2)
- 한국강구조학회(2)
- 한국교육행정학회(2)
- 한국목재공학회(2)
- 한국소음진동공학회(2)
- 한국안전학회(2)
- 한국전기전자재료학회(2)
- 한국전산구조공학회(2)
- 한국전자파학회(2)
- 한국지반환경공학회(2)
- 한국항공우주학회(2)
- 대한건축학회(1)
- 대한구순구개열학회(1)
- 대한약리학회(1)
- 대한치과이식임플란트학회(1)
- 대한토목학회(1)
- 서강대학교 철학연구소(1)
- 한국가구학회(1)
- 한국고고학회(1)
- 한국고무학회(1)
- 한국구조물진단유지관리공학회(1)
- 한국군사과학기술학회(1)
- 한국기업교육학회(1)
- 한국도로학회(1)
- 한국동력기계공학회(1)
- 한국마린엔지니어링학회(1)
- 한국비파괴검사학회(1)
- 한국소성가공학회(1)
- 한국시각장애교육재활학회(1)
- 한국식품위생안전성학회(1)
- 한국식품저장유통학회(1)
- 한국아동권리학회(1)
- 한국음악교육공학회(1)
- 한국음악교육학회(1)
- 한국인터넷정보학회(1)
- 한국자동차공학회(1)
- 한국재료학회(1)
- 한국전문물리치료학회(1)
- 한국전자통신연구원(1)
- 한국정밀공학회(1)
- 한국조사연구학회(1)
- 한국중국문화학회(1)
- 한국철도학회(1)
- 한국추진공학회(1)
- 한국토목섬유학회(1)
- 한국통계학회(1)
- 한국화재소방학회(1)
- 환태평양유아교육연구학회(1)
간행물
- CARBON LETTERS(175)
- STEEL & COMPOSITE STRUCTURES : AN INTERNATIONAL JOURNAL(20)
- 신경정신의학(15)
- JOURNAL OF VETERINARY SCIENCE(10)
- 예술인문사회융합멀티미디어논문지(10)
- 대한기계학회론문집. TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS. A. A(7)
- THE PLANT PATHOLOGY JOURNAL (5)
- 대한기계학회논문집(4)
- 폴리머(4)
- 한국공작기계학회논문집(4)
- 한국습지학회지(4)
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY(3)
- STRUCTURAL ENGINEERING AND MECHANICS : AN INTERNATIONAL JOURNAL(3)
- 복합신소재구조학회 논문집(3)
- 열환경공학(3)
- 한국해양공학회지(3)
- THE KOREAN JOURNAL OF PHYSIOLOGY & PHARMACOLOGY(2)
- 교육사회학연구(2)
- 교육행정학연구(2)
- 국민연금연구원 연구보고서(2)
- 목재공학(2)
- 복합재료 : 한국복합재료학회지(2)
- 콘크리트학회논문집(2)
- 한국가스학회지(2)
- 한국강구조학회 논문집(2)
- 한국안전학회지(2)
- 한국전산구조공학회논문집(2)
- 한국지반공학회논문집(2)
- 한국지반환경공학회논문집(2)
- ADVANCED COMPOSITE MATERIALS : THE OFFICIAL JOURNAL OF THE JAPAN SOCIETY OF COMPOSITE MATERIALS AND (1)
- ASIA-PACIFIC JOURNAL OF RESEARCH IN EARLY CHILDHOOD EDUCATION(1)
- COMMUNICATIONS FOR STATISTICAL APPLICATIONS AND METHODS(1)
- COMPOSITES RESEARCH(1)
- ELASTOMERS AND COMPOSITES(1)
- ETRI JOURNAL(1)
- INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY(1)
- JOURNAL OF DENTAL IMPLANT RESEARCH(1)
- JOURNAL OF THE KOREA ELECTROMAGNETIC ENGINEERING SOCIETY(1)
- KSAS INTERNATIONAL JOURNAL(1)
- KSII TRANSACTIONS ON INTERNET AND INFORMATION SYSTEMS : TIIS(1)
- TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS(1)
- 구조물진단학회지(1)
- 기업교육과 인재연구(1)
- 대한건축학회논문집 : JOURNAL OF THE ARCHITECTURAL INSTITUTE OF KOREA : STRUCTURE & CONSTRUCTION / 구조계(1)
- 대한구순구개열학회지(1)
- 대한약리학잡지(1)
- 대한토목학회논문집(1)
- 비파괴검사학회지(1)
- 소성가공(1)
- 소음진동(1)
- 시각장애연구(1)
- 아동과 권리(1)
- 음악교육공학(1)
- 음악교육연구(1)
- 전기전자재료학회논문지(1)
- 조사연구(1)
- 중국학논총(1)
- 철학논집(1)
- 콘크리트학회지(1)
- 한국가구학회지(1)
- 한국고고학보(1)
- 한국교육사회학회 학술대회자료집(1)
- 한국군사과학기술학회지(1)
- 한국도로학회논문집(1)
- 한국동력기계공학회지(1)
- 한국마린엔지니어링학회지(1)
- 한국소음진동공학회논문집(1)
- 한국식품위생안전성학회지(1)
- 한국식품저장유통학회지(1)
- 한국재료학회지(1)
- 한국전문물리치료학회지(1)
- 한국전자파학회논문지(1)
- 한국정밀공학회지(1)
- 한국지반공학회지(1)
- 한국철도학회 논문집(1)
- 한국추진공학회지(1)
- 한국토목섬유학회 논문집(1)
- 한국항공우주학회지(1)
- 한국화재소방학회 논문지= JOURNAL OF KOREAN INSTITUTE OF FIRE SCIENCE & ENGINEERING(1)
전체 선택해제
총 349건 검색
본문검색 결과만 보기
-
A Protection Ratio with Composite Fade Margin for Detailed Frequency Coordination in Microwave Relay System Network
Suh. Kyoung-Whoan 한국전자파학회 Journal of the Korea Electromagnetic Engineering Society 8 Pages
한국전자파학회 Journal of the Korea Electromagnetic Engineering Society 2007, Vol.7 No.2 83-90 (8 pages)
-
The Influence of the Aspect Ratio on the Natural Frequency of the Composite Laminated Plates
한봉구, 석주원, Han. Bong-Koo, Suck. Ju-Won 한국복합신소재구조학회 복합신소재구조학회 논문집 6 Pages
한국복합신소재구조학회 복합신소재구조학회 논문집 2010, Vol.1 No.2 14-19 (6 pages)
건설관련 설계기술자들에게는 첨단 복합신소재 구조에 대한 이론이 너무 어려워서 간단하면서도 쉽게 적용할 수 있는 정확한 방법을 필요로 하고 있다. 몇 가지 섬유 배향각을 가진 적층판은 층수가 증가하면 $D_{16}$, $B_{16}$, $D_{26}$ 및 $B_{26}$ 강성이 감소하게 되어 특별직교이방성 판처럼 거동함을 밝히고, 간단한 공식들을 개발하여 발표한 바 있다. 대부분의 교량이나 건물의 상판은 형상비가 큰 경우가 많은데, 이런 구조물의 평형방정식에 대한 종방향모멘트항(Mx)의 영향은 매우 작아서, 더욱 간단한 해석이 가능하다. 본... -
Effect of the surface modification using MWCNTs with different L/D by two different methods of deposition on the IFSS of single carbon fiber-epoxy resin composite
Minerva L. Herrera-Sosa, Alex Valadez-Gonz?lez, Humberto V?zquez-Torres, Pierre G. Mani-Gonz?lez, Pedro J. Herrera-Franco 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 3 18-27 (10 pages)
surface morphology after the MWCNT deposition were analyzed using SEM, which revealed a higher density and uniform coverage for the PAMAM-treated CF and the short MWCNTs. The interfacial adhesion of the composite materials was evaluated using the single fiber fragmentation technique. The results indicated an improvement in the interfacial shear strength with the addition of the short-MWCNTs treated with acid solutions and grafted onto the surface of the CF fiber using electrostatic attraction. -
Capacitance behaviors of conducting polymer-coated graphene nanosheets composite electrodes containing multi-walled carbon nanotubes as additives
Hoe-Seung Kim, Yongju Jung, Seok Kim 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.23 9 63-68 (6 pages)
Global warming is rapidly becoming a major concern as a result of the continuing emissions of greenhouse gases generated by the combustion of fossil fuels. To resolve this problem, various studies on efficient energy storage devices have been undertaken. Electronic technologies are increasingly used in electronic products and systems, and they require effective energy storage [1,2]. Supercapacitors are energy storage devices with high power density and long cycle life, and have been spotlighted... -
Comparative numerical evaluation for the low velocity impact behavior of T300 and T800 composite system
Jae-Seok Choi, Heung Soap Choi, Soo-Jin Park, Myung Kyun Park 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 9 89-95 (7 pages)
Carbon fiber reinforced polymer (CFRP) composites have been used for many decades for extreme light weight design purposes in various areas, such as the aerospace industry, automobiles, sports goods and etc. because they provide the advantages of high specific strength and high rigidity [1]. In particular, the fuselage and wings of various aircraft, as well as the load bearing structures and components of mechanical and civil engineering systems are currently being manufactured with CFRP.... -
Thermo-electrical properties of randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija, N. Supriya 한국탄소학회 Carbon Letters 11 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 3 25-35 (11 pages)
of low cost and rapidly produced randomly oriented carbon/carbon (C/C) composite. The composite body was fabricated by combining the high-pressure hot-pressing (HP) method with the lowpressure impregnation thermosetting carbonization (ITC) method. After the ITC method step selected samples were graphitized at 3000°C. Detailed characterization of the samples’ physical properties and thermal properties, including thermal diffusivity, thermal conductivity, specific heat and coefficient of thermal... -
Electrochemical synthesis of nanosized hydroxyapatite/graphene composite powder
Vesna Mi?kovi?-Stankovi?, Sanja Erakovi?, Ana Jankovi?, Maja Vuka?inovi?-Sekuli?, Miodrag Mitri?, Young Chan Jung, Soo Jin Park, Kyong 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.4 2 233-240 (8 pages)
novel hydroxyapatite/graphene (HAP/ Gr) composite powder suitable for medical applications as a hard tissue implant (scaffold). The synthesis was performed in a homogeneous dispersion containing Na2H2EDTA·2H2O, NaH2PO4 and CaCl2 with a Ca/EDTA/PO4 3? concentration ratio of 0.25/0.25/0.15M, along with 0.01 wt% added graphene nanosheets, at a current density of 137 mA cm?2 and pH value of 9.0. The field emission scanning electron microscopy and transmission electron microscopy observations of the... -
Manufacturing and characteristics of PAN-based composite carbon fibers containing cellulose particles
Jee-Woo Yang, Da Young Jin, Ji Eun Lee, Seung Goo Lee, Won Ho Park 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.3 7 203-210 (8 pages)
such as the heat treatment temperature of the cellulose particles and the amount of cellulose added, the thermal and mechanical properties of the PANbased carbon fibers were investigated. The results show that it is possible to manufacture composite carbon fibers with low thermal conductivity. That is, thermal conductivities were reduced by the cellulose particles in the PAN based carbon fibers while at the same time, the tensile strength loss was minimized, and the tensile modulus increased. -
The effects of stacking sequence on the penetration-resistant behaviors of T800 carbon fiber composite plates under low-velocity impact loading
Furqan Ahmad, Jung-Wuk Hong, Heung Soap Choi, Soo-Jin Park, Myung Kyun Park 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 6 107-115 (9 pages)
low-velocity impact load on carbon fiber reinforced polymer (CFRP) composite plates fabricated with various stacking sequences were studied experimentally. The impact responses of the CFRP composite plates were significantly affected by the laminate stacking sequences. Three types of specimens, specifically quasi-isotropic, unidirectional, and cross-ply, were tested by a constant impact carrying the same impact energy level. An impact load of 3.44 kg, corresponding to 23.62 J, was applied to the... -
Influence of hot-pressing pressure on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija and Sharad Chandra Sharma 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.1 4 25-33 (9 pages)
The prime objective of this research was to study the influence of hot-pressing pressure and matrix-to-reinforcement ratio on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon-composite. Secondary objectives included determination of the physical and mechanical properties of the resulting composite. The ‘hybrid carbon-fiberreinforced mesophase-pitch-derived carbon-matrix’ composite was fabricated by hot pressing. During hot pressing, pressure was varied from 5... -
Morphological optimization of process parameters of randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija, Sushant Krunal Manwatkar, Sharad Chandra Sharma, Anil Verma 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.1 3 25-31 (7 pages)
a randomly oriented discrete length hybrid carbon fiber reinforced carbon matrix composite. The composite is fabricated by moulding of a slurry into a preform, followed by hot-pressing and carbonization. Heating rates of 0.1, 0.2, 0.3, 0.5, 1, and 3.3°C/min and pressures of 5, 10, 15, and 20 MPa are applied during hot-pressing. Matrix precursor to reinforcement weight ratios of 70:30, 50:50, and 30:70 are also considered. A microstructure analysis of the carbon/ carbon compacts is performed for...
