발행기관
- 한국탄소학회(32)
- 대한기계학회(4)
- 한국열환경공학회(4)
- 한국대기환경학회(3)
- 대한환경공학회(2)
- 인문사회과학기술융합학회(2)
- 한국수소및신에너지학회(2)
- 한국연소학회(2)
- 한국유화학회(2)
- 대한화학회(1)
- 한국가스학회(1)
- 한국여가문화학회(1)
- 한국자동차공학회(1)
- 한국추진공학회(1)
간행물
- CARBON LETTERS(32)
- 열환경공학(3)
- 한국대기환경학회지(3)
- 대한기계학회론문집. TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS. B. B(2)
- 예술인문사회융합멀티미디어논문지(2)
- 한국수소 및 신에너지학회 논문집(2)
- 한국연소학회지(2)
- 한국유화학회지(2)
- BULLETIN OF THE KOREAN CHEMICAL SOCIETY(1)
- ENVIRONMENTAL ENGINEERING RESEARCH(1)
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY(1)
- 대한기계학회논문집(1)
- 대한환경공학회지(1)
- 여가학연구(1)
- 한국가스학회지(1)
- 한국열환경공학회 학술대회지(1)
- 한국자동차공학회논문집(1)
- 한국추진공학회지(1)
전체 선택해제
총 58건 검색
본문검색 결과만 보기
-
Carbon nanospheres synthesized via solution combustion method: their application as an anode material and catalyst for hydrogen production
Vivek Dhand, M Venkateswer Rao, J. S. Prasad, Garima Mittal, Kyong Yop Rhee, Hyeon Ju Kim, Dong Ho Jung 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.3 7 198-202 (5 pages)
range of 10-50 nm were synthesized using the solution combustion method. High-resolution transmission electron microscopy (HRTEM) revealed a densely packed high surface area of SP2-hybridized carbon; however, there were no crystalline structural components, as can be seen from the scanning electron microscopy, HRTEM, X-ray diffraction, Raman spectroscopy, and thermal gravimetric analyses. Electrochemical and thermo catalytic decomposition study results show that the material can be used as a... -
Catalytic combustion behaviors of methane and propane over the PD-based catalyst in the BOP for MCFC power generation systems
Lee. Youn-Hwa, Kim. Man-Young 대한기계학회 Journal of mechanical science and technology 7 Pages
대한기계학회 Journal of mechanical science and technology 2012, Vol.26 No.8 2259-2265 (7 pages)
-
EURO-VI 규제 대응 배출가스 저감 장치에 대한 연구
박승원(Seung-won-Park), 백두성(Doo-Sung-Baik) 인문사회과학기술융합학회 예술인문사회융합멀티미디어논문지 9 Pages
인문사회과학기술융합학회 예술인문사회융합멀티미디어논문지 2018, 제 8권 제 11호 20 205-213 (9 pages)
과거 자동차는 성능위주로 개발되어 왔으며 지속적으로 증가하고 있으나 자동차에서 배출되는 배출가스는 총체적으로 환경오염에 미치는 영향이 매우 크다. 그러나 탄화수소 연료를 탈피하지 않고는 배출가스 저감을 이루기에는 어렵다. EURO-VI 규제는 질소산화물 저감을 위한 규제로 저감하기 위해서 다양한 기술이 개발되고 있다. 대표되는 기술이 LNT와 SCR이 있는데 SCR 경우는 환원제로 요소수를 분사시키는데 화학반응 과정에서 반응하지 못한 요소수는 대기로 노출되어 미세먼지 (PM)을 악화시킬 수 있다. 따라서 요소수의... -
LNT 시스템에서 연료 최적화
박승원, 백두성 인문사회과학기술융합학회 예술인문사회융합멀티미디어논문지 8 Pages
인문사회과학기술융합학회 예술인문사회융합멀티미디어논문지 2017, 제 7권 제 11호 43 439-446 (8 pages)
현재 자동차수는 지속적으로 증가하고 있으며 자동차에서 배출되는 배출가스는 점차적으로 총 환 경오염에 미치는 영향이 심각해진고 있다. 이에 따라서 전기 자동차 등 친환경자동차에 대한 개발을 여러 분야에서 서둘러 연구 개발하고 있다. 전기자동차는 테슬라를 중심으로 연구 개발이 되고 있으 며 전기시장의 80% 이상을 지배하고 있다. 핵심기술인 모터의 가속성과 내구성이 기술의 관건이라고 할 수 있다. 친환경자동차로는 수소, LPG. CNG와 바이오연로를 사용하는 자동차로서 기존의 내연기 관을 수정하여 발전시킨 기술이라고... -
The Study of NOx Removal Efficiency by NH3 over V2O5/TiO2
Keon Joo Lee 한국열환경공학회 한국열환경공학회 학술대회지 3 Pages
한국열환경공학회 한국열환경공학회 학술대회지 2015년 춘계 35 284-286 (3 pages)
: NO 1780ppm, NH3 1780ppm, O2 1%, and N2 as balance gas. In this study, gas analyzer was used to measure the outgassing gas. Catalyst bed was handled for 1hr at 450℃, and the reactivity of the various catalyst was determined in a wide temperature range. Conversion of NH3/NO ratio was practiced at 1, 1.5, 2 respectively and conversion of O2 concentration was practiced at respectively and the space velocity were as follows : 10,000, 15,000, 17,000 hr-1 respectively. It was found that the maximum... -
제철소 부생가스로부터 얻어진 개질가스 내 CO2 흡착분리 특성 연구
김양진, 라종남, 라종일 한국열환경공학회 열환경공학 6 Pages
한국열환경공학회 열환경공학 2019, 제 14권 2호 5 34-39 (6 pages)
-
The United States:A Discursive Analysis of the Leisure Myth
William Cannon Hunter 한국여가문화학회 여가학연구 17 Pages
한국여가문화학회 여가학연구 2006, Vol.4 No.1 4 55-71 (17 pages)
-
Improvement of gas sensing properties of carbon nanofibers based on polyacrylonitrile and pitch by steam activation
Jeongsik Kim, Hyung-Il Kim, Jumi Yun 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 5 36-40 (5 pages)
Polyacrylonitrile/pitch nanofibers were prepared by electrospinning as a precursor for a gas sensor material. Pitch nanofibers were properly fabricated by incorporating polyacrylonitrile as an electrospinning supplement component. Polyacrylonitrile/pitch nanofibers were activated with steam at various temperatures followed by subsequent carbonization to make carbon nanofibers with a highly conductive graphitic structure. Steam activation was effective in facilitating gas adsorption onto the... -
Lyocell-based activated carbon fibers improved the adsorption of harmful gas properties when produced via dual-simultaneous treatments
Byong Chol Bai, Ji Sun Im, Young-Seak Lee 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2017, Vol.23 10 69-73 (5 pages)
In gas adsorption processes, activated carbon fibers (ACFs) are used for the adsorption of the harmful gases that are generated by coal or oil combustion, and they have been widely studied [1,2]. ACFs have been used for harmful gas removal because of their specific surface area, micropores, reproducibility, safety, and processing ability, which are beneficial properties for a wide range of applications [3,4]. -
Synthesis and characterization of carbon doped TiO₂ photocatalysts supported on stainless steel mesh by sol-gel method
JO. Tijani, OO. Fatoba, TC. Totito, WD. Roos, LF. Petrik 한국탄소학회 Carbon Letters 12 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 6 48-59 (12 pages)
the prepared catalyst was investigated. The prepared catalysts were characterized by several analytical methods: high resolution scanning electron microscopy (HRSEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). The XRD patterns showed that the supported TiO₂ nanocrystals are typically anatase, polycrystalline and body-centered tetragonal in structure. The EDS and XPS results complemented one another and... -
Biocomposite membranes based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and multiwall carbon nanotubes for gas separation
Mongyoung Huh, Hye Min Lee, Young Soo Park, Seok Il Yun 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.21 17 116-121 (6 pages)
The development of gas separation membranes is currently an active research area because of the rapidly increasing interest in carbon dioxide capture and hydrogen recovery, which are two of the most important solutions for problems related to energy and the environment [1-4]. Polymer membranes show selectivity in the separation of gases due to differences in the permeability of individual gases through the polymer film [3,4]. Even though advantageous in terms of low cost, the segmental... -
KOH-activated graphite nanofibers as CO2 adsorbents
Hui Yuan, Long-Yue Meng, Soo-Jin Park 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 12 99-103 (5 pages)
Porous carbons have attracted much attention for their novel application in gas storage. In this study, porous graphite nano-fiber (PGNFs)-based graphite nano fibers (GNFs) were prepared by KOH activation to act as adsorbents. The GNFs were activated with KOH by changing the GNF/KOH weight ratio from 0 through 5 at 900°C. The effects of the GNF/ KOH weight ratios on the pore structures were also addressed with scanning electron microscope and N2 adsorption/desorption measurements. We found that... -
Adsorptive removal of atmospheric pollutants over Pyropia tenera chars
Heejin Lee, Rae-su Park, Hyung Won Lee, Yeojin Hong, Yejin Lee, Sung Hoon Park, Sang-Chul Jung, Kyung-Seun Yoo, Jong-Ki Jeon, Young-Kwon 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 10 79-88 (10 pages)
As a replacement for activated carbon, biochar was synthesized and used for the adsorptive removal of formaldehyde and nitrogen oxide. Biochar was produced from the fast pyrolysis of the red marine macro alga, Pyropia tenera. The P. tenera char was then activated with steam, ammonia and KOH to alter its characteristics. The adsorption of formaldehyde, which is one of the main indoor air pollutants, onto the seaweed char was performed using 1-ppm formaldehyde and the char was activated using a... -
Carbon rich fly ash and their nanostructures
Numan Salah, Sami S. Habib, Zishan H. Khan, Ahmed Alshahrie, Adnan Memic, Attieh A. Al-ghamdi 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 3 23-31 (9 pages)
precursor and catalyst for carbon nanotube growth. This fly ash powder is mostly composed of pure carbon, predominantly present as sp2. In this work, the effect of sonication time on the morphology and structural properties of carbon rich fly ash particles is reported. The obtained results show that ultrasound treatment is an effective tool for producing ultrafine particles/fragments with higher porosity, which might be suitable for the adsorption of gasses. Moreover, carbon nanoparticles (CNPs)... -
Cu²? ion reduction in wastewater over RDF-derived char
Hyung Won Lee, Rae-su Park, Sung Hoon Park, Sang-Chul Jung, Jong-Ki Jeon, Sang Chai Kim, Jin Do Chung, Won Geun Choi, Young-Kwon Park 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2016, Vol.18 8 49-55 (7 pages)
Refuse-derived fuel (RDF) produced using municipal solid waste was pyrolyzed to produce RDF char. For the first time, the RDF char was used to remove aqueous copper, a representative heavy metal water pollutant. Activation of the RDF char using steam and KOH treatments was performed to change the specific surface area, pore volume, and the metal cation quantity of the char. N2 sorption, Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), and Fourier transform infrared spectroscopy... -
A review: role of interfacial adhesion between carbon blacks and elastomeric materials
Min-Joo Kang, Young-Jung Heo, Fan-Long Jin, Soo-Jin Park 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2016, Vol.18 1 1-10 (10 pages)
Carbon blacks (CBs) have been widely used as reinforcing materials in advanced rubber composites. The mechanical properties of CB-reinforced rubber composites are mostly controlled by the extent of interfacial adhesion between the CBs and the rubber. Surface treatments are generally performed on CBs to introduce chemical functional groups on its surface. In this study, we review the effects of various surface treatment methods for CBs. In addition, the preparation and properties of CB-reinforced... -
A review: methane capture by nanoporous carbon materials for automobiles
Pil-Seon Choi, Ji-Moon Jeong, Yong-Ki Choi, Myung-Seok Kim, Gi-Joo Shin, Soo-Jin Park 한국탄소학회 Carbon Letters 11 Pages
한국탄소학회 Carbon Letters 2016, Vol.17 No.1 3 18-28 (11 pages)
Global warming is considered one of the great challenges of the twenty-first century. In order to reduce the ever-increasing amount of methane (CH4) released into the atmosphere, and thus its impact on global climate change, CH4 storage technologies are attracting significant research interest. CH4 storage processes are attracting technological interest, and methane is being applied as an alternative fuel for vehicles. CH4 storage involves many technologies, among which, adsorption processes... -
Electrochemical synthesis of nanosized hydroxyapatite/graphene composite powder
Vesna Mi?kovi?-Stankovi?, Sanja Erakovi?, Ana Jankovi?, Maja Vuka?inovi?-Sekuli?, Miodrag Mitri?, Young Chan Jung, Soo Jin Park, Kyong 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.4 2 233-240 (8 pages)
Electrochemical synthesis was employed to prepare a novel hydroxyapatite/graphene (HAP/ Gr) composite powder suitable for medical applications as a hard tissue implant (scaffold). The synthesis was performed in a homogeneous dispersion containing Na2H2EDTA·2H2O, NaH2PO4 and CaCl2 with a Ca/EDTA/PO4 3? concentration ratio of 0.25/0.25/0.15M, along with 0.01 wt% added graphene nanosheets, at a current density of 137 mA cm?2 and pH value of 9.0. The field emission scanning electron microscopy and... -
Carbon nanotubes synthesis using diffusion and premixed flame methods: a review
Garima Mittal, Vivek Dhand, Kyong Yop Rhee, Hyeon-Ju Kim and Dong Ho Jung 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.1 1 1-10 (10 pages)
In recent years, flame synthesis has absorbed a great deal of attention as a combustion method for the production of metal oxide nanoparticles, carbon nanotubes, and other related carbon nanostructures, over the existing conventional methods. Flame synthesis is an energyefficient, scalable, cost-effective, rapid and continuous process, where flame provides the necessary chemical species for the nucleation of carbon structures (feed stock or precursor) and the energy for the production of carbon... -
Overlook of carbonaceous adsorbents and processing methods for elemental mercury removal
Kyong-Min Bae, Byung-Joo Kim and Soo-Jin Park 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.4 2 238-246 (9 pages)
People have been concerned about mercury emissions for decades because of the extreme toxicity, persistence, and bioaccumulation of methyl Hg transformed from emitted Hg. This paper presents an overview of research related to mercury control technology and identifies areas requiring additional research and development. It critically reviews measured mercury emissions progress in the development of promising control technologies. This review provides useful information to scientists and engineers... -
Carbon-allotropes: synthesis methods, applications and future perspectives
P. S. Karthik, A. L. Himaja and Surya Prakash Singh 한국탄소학회 Carbon Letters 19 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.4 1 219-237 (19 pages)
The element carbon has been used as a source of energy for the past few hundred years, and now in this era of technology, carbon has played a significant and very prominent role in almost all fields of science and technology. So as an honour to this marvellous element, we humans should know about its various forms of existence. In this review article, we shed light on all possible carbon-allotropes; similarities in their synthesis techniques and the starting materials; their wide range of... -
Superhydrophobic carbon-based materials: a review of synthesis, structure, and applications
Long-Yue Meng, Soo-Jin Park 한국탄소학회 Carbon Letters 16 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.2 5 89-104 (16 pages)
Materials with appropriate surface roughness and low surface energy can form superhydrophobic surfaces, displaying water contact angles greater than 150°. Superhydrophobic carbon-based materials are particularly interesting due to their exceptional physicochemical properties. This review discusses the various techniques used to produce superhydrophobic carbon-based materials such as carbon fibers, carbon nanotubes, graphene, amorphous carbons, etc. Recent advances in emerging fields such as... -
Double-walled carbon nanotubes: synthesis, structural characterization, and application
Yoong Ahm Kim, Kap-Seung Yang, Hiroyuki Muramatsu, Takuya Hayashi, Morinobu Endo, Mauricio Terrones, Mildred S. Dresselhaus 한국탄소학회 Carbon Letters 12 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.2 4 77-88 (12 pages)
Double walled carbon nanotubes (DWCNTs) are considered an ideal model for studying the coupling interactions between different concentric shells in multi-walled CNTs. Due to their intrinsic coaxial structures they are mechanically, thermally, and structurally more stable than single walled CNTs. Geometrically, owing to the buffer-like function of the outer tubes in DWCNTs, the inner tubes exhibit exciting transport and optical properties that lend them promise in the fabrication of field-effect...
