자료유형
발행기관
- 한국탄소학회(61)
- 테크노프레스(14)
- 한국콘크리트학회(13)
- 한국농공학회(2)
- 한국복합재료학회(2)
- 한국터널지하공간학회(2)
- 대한조선학회(1)
- 대한토목학회(1)
- 한국고무학회(1)
- 한국공간구조학회(1)
- 한국섬유공학회(1)
- 한국습지학회(1)
- 한국열환경공학회(1)
- 한국웰니스학회(1)
- 한국정밀공학회(1)
- 한국항공우주학회(1)
간행물
- CARBON LETTERS(61)
- STRUCTURAL ENGINEERING AND MECHANICS : AN INTERNATIONAL JOURNAL(8)
- 콘크리트학회논문집(7)
- INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS(4)
- COMPUTERS & CONCRETE(3)
- STEEL & COMPOSITE STRUCTURES : AN INTERNATIONAL JOURNAL(3)
- 한국터널지하공간학회논문집(2)
- ADVANCED COMPOSITE MATERIALS : THE OFFICIAL JOURNAL OF THE JAPAN SOCIETY OF COMPOSITE MATERIALS AND (1)
- CONCRETE JOURNAL(1)
- ELASTOMERS AND COMPOSITES(1)
- FIBERS AND POLYMERS(1)
- INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES(1)
- INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING(1)
- INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING(1)
- KSCE JOURNAL OF CIVIL ENGINEERING(1)
- 복합재료 : 한국복합재료학회지(1)
- 열환경공학(1)
- 콘크리트학회지(1)
- 한국농공학회논문집(1)
- 한국농공학회지(1)
- 한국쉘-공간구조학회논문집(1)
- 한국습지학회지(1)
- 한국웰니스학회지(1)
전체 선택해제
총 104건 검색
본문검색 결과만 보기
-
133 Molecular Weight Distribution of Liquid Phase AN and Solid Phase Polymer in Precipitation Polymerization of AN By Changing Solution Composition and Temperature
WeiweiLiu, ShuangkunZhang, JingWang, SeungKonRyu, Ri-guangJin 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2012, Vol.13 No.3 1 133-138 (6 pages)
-
이축 압출공정을 이용한 Wood Polymer Composite의 제조 및 특성 분석
이종혁, 이병갑, 박기훈, 방대석, 지광환, 신민철, Lee. Jong-Hyeok, Lee. Byung-Gab, Park. Ki-Hun, Bang. Dae-Suk, Jhee. Kwang-Hwan, Sin. Min-Cheol 한국고무학회 Elastomers and composites 7 Pages
한국고무학회 Elastomers and composites 2011, Vol.46 No.3 211-217 (7 pages)
Wood Polymer Composite(WPC)는 우수한 물성 및 가공성과 더불어 자원재활용 및 벌목규제 대응 등의 환경적인 측면에서 각광을 받고 있는 재료이다. 본 연구에서는 이축스크류식 치합형 압출기를 이용하여 상용화 WPC를 제조하였다. WPC의 물성에 영향을 미치는 세 가지 주요 실험 변수 즉 목분의 함량, coupling agent의 함량 그리고 목분의 전처리 영향을 자세히 관찰하였다. 목분의 함량에 따른 WPC의 물성변화는 목분함량이 증가함에 따라 인장강도 와 열안정성이 감소하고, 수분흡수성이 증가하는 것이 관찰되었다. PP-g-MA 첨가 시... -
Mechanical and electrical properties of epoxy resin/epoxidized castor oil/carbon fiber cloth composites
Fan-Long Jin, Heng Zhang, Shan-Shan Yao, Soo-Jin Park 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 12 105-109 (5 pages)
properties and are among the materials most frequently used in the preparation of a large variety of composites [1-5]. CF-reinforced polymer composites have been widely used in many advanced technological fields, such as aerospace, engineering, sporting goods, automobiles, and marine industry during the past few decades due to their excellent properties, including high strength-to-weight ratios, light weight, high thermal and electrical conductivity, and relative ease of processing [6-10]. -
The impact fracture behaviors of CFRP/EVA composites by drop-weight impact test
Sun-Ho Go, Hong-Gun Kim, Hee-Jae Shin, Min-Sang Lee, Hyun-Gyung Yoon, Lee-Ku Kwac 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2017, Vol.21 4 23-32 (10 pages)
A drop weight impact test was conducted in this study to analyze the mechanical and thermal properties caused by the changes in the ratio of carbon fiber reinforced plastic (CFRP) to ethylene vinyl acetate (EVA) laminations. The ratios of CFRP to EVA were changed from 10:0 (pure CFRP) to 9:1, 8:2, 6:4, and 5:5 by manufacturing five different types of samples, and at the same time, the mechanical/thermal properties were analyzed with thermo-graphic images. As the ratio of the CFRP lamination was... -
Effects of electrochemical oxidation of carbon fibers on interfacial shear strength using a micro-bond method
Dong-Kyu Kim, Kay-Hyeok An, Yun Hyuk Bang, Lee-Ku Kwac, Sang-Yub Oh, Byung-Joo Kim 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 4 32-39 (8 pages)
In this work, we studied the effects of electrochemical oxidation treatments of carbon fibers (CFs) on interfacial adhesion between CF and epoxy resin with various current densities. The surface morphologies and properties of the CFs before and after electrochemical-oxidation-treatment were characterized using field emission scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and single-fiber contact angle. The... -
Cellulose-based carbon fibers prepared using electron-beam stabilization
Min Il Kim, Mi-Seon Park, Young-Seak Lee 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2016, Vol.18 9 56-61 (6 pages)
Cellulose fibers were stabilized by treatment with an electron-beam (E-beam). The properties of the stabilized fibers were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The E-beam-stabilized cellulose fibers were carbonized in N₂ gas at 800°C for 1 h, and their carbonization yields were measured. The structure of the cellulose fibers was determined to have changed to hemicellulose and... -
Manufacturing and characteristics of PAN-based composite carbon fibers containing cellulose particles
Jee-Woo Yang, Da Young Jin, Ji Eun Lee, Seung Goo Lee, Won Ho Park 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.3 7 203-210 (8 pages)
This study fabricated low thermal conductive polyacrylonitrile (PAN)-based carbon fibers containing cellulose particles while maintaining their mechanical properties. The high thermal conductivity of carbon fibers limits their application as a high temperature insulator in various systems such as an insulator for propulsion parts in aerospace or missile systems. By controlling process parameters such as the heat treatment temperature of the cellulose particles and the amount of cellulose added,... -
Effects of cross-linking methods for polyethylene-based carbon fibers: review
Kwan-Woo Kim, Hye-Min Lee, Jeong-Hun An, Byoung-Suhk Kim, Byung-Gak Min, Shin-Jae Kang, Kay-Hyeok An, Byung-Joo Kim 한국탄소학회 Carbon Letters 24 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.3 2 147-170 (24 pages)
In recent decades, there has been an increasing interest in the use of carbon fiber reinforced plastic (CFRP) in aerospace, renewable energy and other industries, due to its low weight and relatively good mechanical properties compared with traditional metals. However, due to the high cost of petroleum-based precursors and their associated processing costs, CF remains a specialty product and as such has been limited to use in high-end aerospace, sporting goods, automotive, and specialist... -
Stabilization of pitch-based carbon fibers accompanying electron beam irradiation and their mechanical properties
Mi-Seon Park, Yoonyoung Ko, Min-Jung Jung, Young-Seak Lee 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 8 121-126 (6 pages)
Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile... -
Preparation and thermal properties of polyethylene-based carbonized fibers
Kwan-Woo Kim, Hye-min Lee, Byoung Suhk Kim, Seon-Hwan Hwang, Lee-Ku Kwac, Kay-Hyeok An and Byung-Joo Kim 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.1 10 62-66 (5 pages)
In this study, carbonized fibers were prepared by using acidically cross-linked LDPE fibers. The surface morphologies of the carbonized fibers were observed by SEM. The effects of cross-linking process temperatures were studied using thermal analyses such as DSC and TGA. The melting and heating enthalpy of the fibers decreased as the cross-linking temperature increased. The cross-linked fibers had a carbonization yield of over 50%. From SEM results the highest yield of carbonized LDPE-based...
