Three kinds of acid clay are chosen as samples; sample-I is the Korean acid clay, Sample-II is prepared by heating the mixure of the Korean acid clay with 20% $H_2SO_4$ for 4 hrs., and the sample-III, the reference sample, is the Japanes acid clay supplied by Katayama Chem. Co.. 15 samples are prepared by heating them at temperatures of $100^{circ}C$, $300^{circ}C$, $500^{circ}C$, $700^{circ}C$, and $900^{circ}C$ for 6 hrs. separately.The adsorption experiments are carried out on these samples using bromphenol blue water soln.(conc., 0.001%) as adsorbate. It is found that the degree of decoloration depends upon the temperature of thermal treatment, i.e., the higher the temperature the lower the degree of decoloration is. At any specified temperature of thermal treatment, the degree of decoloration is in following order: sample II>sample I>sample III.The X-ray photographs of the samples show that the intensities of a few specified lines decrease with increasing temperatures of thermal treatment.