For the determination of stress intensity factors, three methods have been used conventionally; the photoelastic method, the compliance method and the electrical resistance method. These methods, however, have common short coming upon experimental performance; the difficulty of cutting out sharp crack tips and arbitray crack forms similar to the practical one on the specimen. to eliminate this flaw, one of the author previously presented new methods, that is, for the determination of $K_{III}$ mode, the membrane analogy was applied and the slab analogy was used for the determination of $K_{I}$ and $K_{II}$ . The validity of this method was proved through the performance of a series of experiments of which theoretical solution are known.n.n.