본 연구에서는 베어링과 같은 기계 회전부품의 정밀진동분석을 위한 구동장치 로서 평판 자기결합기를 갖는 회전장치를 제작하였다. 이 회전장치의 진동특성을 고 찰하기 위해 Weinmann 등의 연구결과에 따라 자기 결합기의 전달 토오크가 그대로 피 동축에 전달됨을 이용하여 이론전개를 하였으며 이 결과를 실험치와 비교하였다.
In direct contact power transmission from primary driver to a secondary follower system, one of the important problems is the vibration transmission. In some applications the reduction of vibration level at the follower as low as possible is utmost important. The magnetically coupled power transmission system is often used for this purpose. In this paper, we report the results of a study on the nonlinear torsional vibration transmission characteristics of the rotating system with face-type magnet coupling. The equation of motion is solved analytically up to 3rd harmonics. The frictional force of the sliding bearing which is used to support the follower shaft is considered as the damping term. Numerical calculations are carried out by the Newton-Raphson method, and the calculated results are compared with the experiment for face-type magnet coupling. The experimental result shows that the reasonant frequency of the magnet coupling is very low and is in good agreement with the theoretical result when the average damping constant per unit area of the sliding bearing is 0.5kg*f*sec/cm$^{3}$.
