본 논문은 선박저항 추정을 위한 통계해석 방법을 기술하고 있다. 조파저항계수 추정식은 조파저항이론을 이용하여 선체주요치수와 횡단면적계수들로부터 유도하였으며, 그 회귀계수들은 저항시험 결과들을 회귀 분석하여 얻었다. 형상영향계수 추정식은 선체주요지수, 횡단면적와 저항시험결과들로부터 순수하게 회귀분석하여 얻었다. 또한 선체주요지수는 바꾸지 않고 횡단면적곡선만을 변화시켜 조파저항을 최소로 해주는 방법을 제시하였다. 이 방법들은 산적화물선의 저항성능 추정에 적용하였다. 그리고 조파저항이 최소가 되는 수정선형을 도출해 냈으며, 이로인한 유효동력의 절감효과를 저항시험을 통해 확인하였다.
This paper describes the statistical analysis method of predicting the ship resistance. The equation for the wavemaking resistance coefficient is derived as the principal dimensions and sectional area coefficients by using the wavemaking resistance theory and its regression coefficients are determined from the regression analysis of the resistance test results. The equation for the form factor is derived by purely regression analysis of the principal dimensions, sectional area coefficients and resistance test results. Also, it is shown that the wavemaking resistance can be minimize by varying the sectional area curve without changing the principal dimensions of the ship. This methods were applied to the resistance prediction of a bulk carrier. And the, the modified hull form with minimum wavemaking resistance was obtained and the reduction of effective power was confirmed by the resistance test.
