본 연구에서는 이러한 해석적 근사해를 이용한 스터링기관의 최적설계조건에 관하여 취급하고자 한다. 단열해석의 결과를 대응하는 등온해석과 비교, 고찰함으로 써 방법에 따른 조건의 차이를 보이고 주요 설계인자의 성능에 미치는 영향을 규명한 다. 또한, 제인자에 따른 기관성능의 변화추이가 편리하게 표시될 수 이씨는 일종의 성능선도(performance map)를 작성하고자 한다.
To investigate the optimum design conditions of Stirling Engines at the preliminary design stage, comparative study between adoabatoc analysis based on an approximate analytical solution to the Ideal Adiabatic Model and the existing isothermal analysis has been carried out. The optimum phase angle obtained from adiabatic analysis to achieve the maximum work with given combination of design parameters is greater than that from isothermal analysis, while the optimum swept volume ratio is smaller. Effect of variation in the temperature ratio on the work parameter is proved to be stronger in adiabatic analysis. On the contrary, the work parameter by adiabatic analysis is less sensitive to a change in the dead volume ratio. Especially in adiabatic analysis there exists the optimum dead volume ratio maximizing the work parameter, which may provide a lower limit of it. Considering that the adiabatic model is more reasonable, signifiant differences between two methods lead to the conclusion that adiabatic analysis is preferable to isothermal one for the preliminary design of Stirling Engines.
