Mullite and cordierite were prepared by the sol-gel route. Boehmite, fumed silica and Mg(NO3)2$.$6H2O were their starting materials. Mullite and cordierite powder were mixed by various weight percent. These mixed sols were ball-milled for 48hrs, dried at 100$^{circ}C$, pressed, cold isostatic pressed and sintered at 1490$^{circ}C$ for 2hrs. Mullite-cordierite composites sintered at 1490$^{circ}C$ for 2hrs had>98% of theoretical density. Bending strength of the sintered bodies were 329-249MPa, dielectric constant 7.1-6.7 at 1MHz and thermal expansion coefficient at 800$^{circ}C$ was matched with Si in the range of 30-35wt% cordierite.