This is the study which appear the relation between the situation of Anchor point and the qualities of lithographic prints using the uncoated paper. Anchor point were measured by microscopic photography and Kubelka-munk`s method. The situation of Anchor point increased with print density and print though, but it decreased with evenness and rub off. In case of commercial uncoated paper, the situation of Anchor point was optimized when it was 25~35% apporoximately. In preparation of samples for microscopic photography, the samples were used by the resin testing methods. This method used that the resin fixes the printed papers of sample very hard, in preparation of samples for microscopica potography a good result could be gained by this method.