기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
Co/Ti이중박막을 이용한 $CoSi_2$에피박막형성에 관한 연구
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • Co/Ti이중박막을 이용한 $CoSi_2$에피박막형성에 관한 연구
저자명
김종렬,배규식,박윤백,조윤성,Kim. Jong-Ryeol,Bae. Gyu-Sik,Park. Yun-Baek,Jo. Yun-Seong
간행물명
한국재료학회지
권/호정보
1994년|4권 1호|pp.81-89 (9 pages)
발행정보
한국재료학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

전자빔 증착법을 사용하여 10nm두께의 Ti과 18nm두께의 Co를 Si(100)기판에 증착한 후, $N_{2}$분위기에서 $900^{circ}C$, 20초 급속 열처리하여, Co/Ti 이중금속박막의 역전을 유도함으로서 $CoSi_{2}$박막을 형성하였다. 4점 탐침기로 측정한 면저항은 3.9Ω/ㅁ 었으며, 열처리 시간을 증가해도 이값은 유지하여 열적 안정성을 나타내었다. XRD 결과는 형성된 실리사이드는 기판과 에피관계를 갖는 $CoSi_{2}$상 임을 보였으며, SEM 사진은 평탄한 표면을 나타내었다. 단면 TEM 사진은 기판위에 형성된 박막층은 70nm 두께의 $CoSi_{2}$ 에피박막과 그위에 두개의 C0-Ri-Si합금층등 세개의 층으로 되어 있음을 보였다. AES 분석은, 기판상의 자연산화막을 형성할 수 있었음을 보여주었다. AES분석은, 기판상의 잔연산화막이 열처리초기, Ti에 의해 제거된후 Co가 원자적으로 깨끗한 Si기판에 확산하여 $CoSi_{2}$에피박막을 형성할 수 있었음을 보여주었다. $700^{circ}C$, 20초 + $900^{circ}C$, 20초 이중 열처리를 한 경우, $CoSi_{2}$결정성장으로 면저항값은 약간 낮아졌으나, 박막의 표면과 계면이 거칠었다. 이 $CoSi_{2}$에피박막의 실제 소자에의 적용방안과 막의 역전을 통한 에피박막형성의 기제를 열역학 및 kinetics 관점에서 고찰하였다.

기타언어초록

Ti film of lOnm thickness and Co film of 18nm thickness were sequentially e-heam evaporated onto Si (100) substrates. Metal deposited samples were rapidly thermal-annt.aled(KTA) in thr N1 en vironment a t $900^{circ}C$ for 20 sec. to induce the reversal of metal bilayer, so that $CoSi_{2}$ thin films could be formed. The sheet resistance measured by the 4-point probe was 3.9 $Omega /square$This valur was maintained with increase in annealing time upto 150 seconds, showing high thermal stab~lity. Thc XRII spectra idrn tified the silicide film formed on the Si substrate as a $CoSi_{2}$ epitaxial layer. The SKM microgr;iphs showed smooth surface, and the cross-sectional TKM pictures revealed that the layer formed on the Si substrate were composed of two Co-Ti-Si alloy layers and 70nm thick $CoSi_{2}$ epl-layer. The AES analysis indicated that the native oxide on Si subs~rate was removed by TI ar the beginning of the RTA, and Ihcn that Co diffused to clean surface of Si substrate so that epitaxial $CoSi_{2}$ film could bt, formed. In thc rasp of KTA at $700^{circ}C$. 20sec. followed by $900^{circ}C$, 20sec., the thin film showed lower sheet resistance, but rough surface and interface owing to $CoSi_{2}$ crystal growth. The application scheme of this $CoSi_{2}$ epilayer to VLSI devices and the thermodynarnic/kinetic mechan~sms of the $CoSi_{2}$ epi-layer formation through the reversal of Co/Ti bdayer were discussed.