- Sol-gel법에 의한 Li 이온-고체 전해질의 $CO_{2}$ 가스 감지 특성
- ㆍ 저자명
- 서무교,송갑득,곽종식,이덕동,Seo. Moo-Gyo,Song. Kap-Duk,Kwak. Jong-Sik,Lee. Duk-Dong
- ㆍ 간행물명
- 센서학회지
- ㆍ 권/호정보
- 1995년|4권 3호|pp.22-29 (8 pages)
- ㆍ 발행정보
- 한국센서학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
$60^{circ}C$의 질소 분위기에서 tetraethyl orthosilcate, lithium methoxide, zirconium n-propoxide 그리고 tributyle phosphate를 전구체로 써서 sol-gel법으로 Li 이온-고체 전해질을 합성하였다. 합성한 물질을 건조하고 분쇄하여, 이를 가압 성형하여 원반형 시편들을 제조하였다. 시편들을 $900^{circ}C{sim}1100^{circ}C$에서 50시간 열처리하였다. 시편들의 물성을 TG/DTA, SEM, AES 및 XRD 법으로 조사하였다. Li 이온 이온-고체 전해질을 이용한 $CO_{2}$ 가스 감지 소자를 제작하고 그 동작 특성을 측정하였다. 제작된 감지 소자 중에서 $1000^{circ}C$에서 열처리한 경우, 동작 온도가 $200^{circ}C{sim}300^{circ}C$ 일 때, $CO_{2}$ 농도 변화에 대해 $35{sim}63mV/decade$의 기전력 변화를 나타내었고, $300{sim}6000 ppm$까지 선형성이 우수하였다.
Lithium ionic solid electrolyte was synthesized at $60^{circ}C$ in $N_{2}$ ambience by sol-gel method, using tetraethyl orthosilcate, lithium methoxide, zirconium n-propoxide, and tributyle phosphate as precursors. The prepared material was dried and crushed into powder, and it was pressed into disk type samples. These samples were sintered at $900^{circ}C{sim}1100^{circ}C$ for 50 hours. The physical characteristics of the samples were investigated by TG/DTA, SEM, AES and XRD methods. $CO_{2}$ sensor based on lithium ionic solid electrolyte was fabricated and its operational characteristics were measured. The sensing characteristics of the sensor sintered at $1000^{circ}C$ shows the variation of e.m.f. about $35{sim}63;mV/decade$ for the variation of $CO_{2}$ concentration at $200^{circ}C{sim}300^{circ}C$ of operating temperature, and good linearity for $300{sim}6000;ppm$.