Rotary disc ultrafiltration module(RDM) was developed for the separation of oil emulsions. This module was devised to reduce the gel polarization phenomenon by alecoupling the operation pressure and the surface velocity of solution in ultrafiltration(UF) processes. Two-shaft engaged disc type RDM having 20 rotary disc membcanes(UOP, USA) was operated under 85kPa vacuum at $25^{circ}$C. The pressure drop due to slip flow in the two-shaft RDM was found to be proportional to $(2.5{omega}r)^{2}$. The pure water flux of two-shaft RDM decreased by 9.95% at the angular velocity of 41.89rad/s compared to the decrease of 3.01% for one-shaft RDM at the same velocity. When the angular velocity was changed from 31.42rad/s to 2.62rad/s, the flux decline for 1% cutting oil in two-shaft RDM was 30.16% that is similar to that of one-shaft RDM. Disc gap of 3mm and 7mm did not show any significant differences in the flux for 1% cutting oil solution. A modified model for two-shaft RDM showed good agreement with the experimental results for the cutting oil solution.