In ahigh power amplifier design, power combiner/divider is used to connect low power amplifiers in parallel. The raidal structure of the powe combiner/divider has not only a good characteristics of port-to-port isolation but also an advantage of giving a redundancy to the structure itself by using RF switches. The parastics of a power resistor, that would be a problem in design process, are removed by both slot lines and cavity resonators, and the comon node in the circuit is rdesigned as a planar topology, and thus a new type of 4-way radial power combiner/divider is accomplished at 1840 ~ 1870 MH PCS frequency band. The insertion loss, reflection, and isolation characteristics of 40way radial power combiner/divider which can be adaptable to PCS system in this thesis are -0.3dB, -24dB,a dn -27dB respectively.