The pH of coconut based activated carbon was changed by treating with NaOH and HNO3 and we have calculated the adsorption amounts of ammonia, hydrogen sulfide and methylmercaptan on the activated carbons using the break-through time which was obtained from break-through curve experiments. As a result of this study, the adsorption amounts of ammonia Has on the activated carbons were 2,6 mg/g, 17.2 mg/g and 31.6 mg/g with the pH 11, pH 7 and pH 3, respectively. These results indicated that the adsorption ability of ammonia on activated carbon was increased with decreasing the pH of activated carbon. Otherwise, in the cases of the adsorption experiment of hydrogen sulfide and methylmercaptan on the activated carbons with different pH. the activated carbon with pH 11 showed higher adsorption capacity than the activated carbons with pH 7 and pH 3. The adsorption amounts of hydrogen sulfide and methylmercaptan were 39.9 mg/g and 178 mg/g with pH 11, respectively. Finally, we analyzed the amount of ammonia delivered from 88 Lights cigarette made of triple filter which contained the activated carbon. The amount of ammonia delivered to smoke from the filter cigarette containing the activated carbon with pH 3 was 45.1㎍/cig. This value was lower 23.8 % than that from the activated carbon with the pH 11. Key words : activated carbon, ammonia, hydrogen sulfide. methylmercaptan