To find the tooth selectivity of the dredge for catching the ark shell Scapharca broughtonii, the probabilities of the ark shells which are not sifting through the gaps between teeth were calculated for the various shell lengths. Considering that these probabilities are in proportion to the relative catching efficiencies, selectivity curves for the ark shell dredge were estimated for the various gaps between teeth. The ratio of the shell length of ark shell to the distance between teeth indicating the relative catching efficiencies of 0%, 50%, 100% respectively, were calculated by using these selectivity curves, and the values were 1.00, 1.32, 1.54 in the distance of 4.0cm between teeth and then, the ratios showed a slight tendency to decrease as the distance between teeth increased in the relative catching efficiency of 100%, In addition, the range of shell length for catching, that is, the range of selective shell length by the distance between teeth was 0.54 in the distance of 4.0cm between teeth.