Physical Properties of Jeungpyun product were analyzed during fermentation in the ranges of 0 to 10 hours. Penetration value of Jeungpyun sample measured by penetrometer was increased greatly according to the development of fermentation time, recording maximum value, 135 at 7 hours. Specific volume and total pore ratio were also increased greatly in course of fermentation time, recording maximum value, 3.5 ㎤/g-dry matter and 54.9％ at fermentation time, 6 hours and 4 hours respectively while they were decreased since then. Some remaining peaks on X-ray diffractogram were seen in all the Jeungpyun samples. Micropores and macropores were observed on cross-sectional view of all the fermented Jeungpyun samples.