This experiment was mainly performed with a biological treatment of laser printed paper using enzyme, We got the following conclusions : In the case of nonionic surfactant treatment, brightness, residual ink contents and several strength properties of deinked paper were excellent at the low dosage of cellulase 0.05%. When mixed cellulase and xylanase was used, yield was increased as the dosage increased up to 0.2%, but brightness was decreased at the same condition. In contrast, deinking efficiency of anionic type was reduced in terms of brightness, residual ink contents, and tensile strength. As flotation time was increased, yield decreased and brightness increased slightly. On the other hand, the addition of surfactant during repulping process showed better result than that during flotation process.