In this paper, we designed and fabricated QMSA(Quarter-Wavelength Microstrip Antenna) for 850MHz band on the CGP-500 PTFE substrate(by CHUKOH company) with ε_r=2.6, H=1.6mm(±0.08), where width of the radiation patch is .identical with that of the ground plane. A well matched feed point was obtained by experiments and this QMSA was fed by using prove feed method. The resonant frequencies and the return losses were mcasured by cutting the gap L₃ between the radiation patch and the ground plane, with a 5mm cutting length, step by step. As a result, we found that the measured return losses were decreased and the resonant frequencies were increased when the gap L₃ was shorter, especially under 10mm, unlike we had expected.