$UO_2$분말에 PVA-Al(III) 착물과 AlOOH를 각각 0.03~1.0wt%를 첨가하여 소결체를 제조한 후 소결체 특성을 비교하였다. PVA-Al(III) 착물과 AlOOH는 $1000^{circ}C$의 소소분위기에서 열분해하는 경우 생성상은 $ heta-Al_2O_3$이었다. 순수 $UO_2$분말에 비해 AlOOH가 첨가된 혼합 분말의 곁보기 밀도는 더 높았고, PVA-Al(III) 착물이 첨가된 혼합 분말은 더 낮은 겉보기 밀도를 보였다. AlOOH가 첨가된 소결체의 경우 약 $800^{circ}C$ 부근에서 치밀화가 시작되었지만, PVA-Al(III) 착물이 첨가된 소결체의 경우에는 약 $900^{circ}C$에서 치밀화가 시작되었다. 기공 크기 분포는 AlOOH가 첨가된 $UO_2$소결체의 경우에 monomodal 형태로, 그리고 PVA-Al(III) 착물의 첨가된 소결체의 경우에는 bimodal 형태로 나타났다. 결정립 크기는 1wt% 첨가시 AlOOH가 첨가된 $UO_2$소결체의 경우에 약 $13mu extrm{m}$이었지만, PVA-Al(III) 착물의 첨가된 소결체의 경우에는 약 $36mu extrm{m}$까지 성장하는 현저한 효과를 확인하였다.
The sintering characteristics of PVA-Al(III) complex added $UO_2$ pellet and AlOOH added $UO_2$pellet were compared. The major phase of PVA-Al(III) complex and AlOOH decomposed at $1000^{circ}C$ in $H_2$atmosphere was $ heta-Al_2O_3$. Compared with the apparent density of pure $UO_2$, that of AlOOH added $UO_2$ powder was higher but that of PVA-Al(III) complex was lower. the densification of AlOOH added $UO_2$ pellet was initiated at about $800^{circ}C$, the densification of PVA-Al(III) complex added $UO_2$ pellet was initiated at about $900^{circ}C$ respectively. In a view of pore size distribution, the PVA-Al(III) complex added $UO_2$ pellet appeared as monomodal type, whereas the AlOOH added $UO_2$ pellet appeared as bimodal type. The grain size of AlOOH added $UO_2$ pellet was about $13mu extrm{m}$ but the grain size of PVA-Al(III) complex added $UO_2$ pellet was increased up to about $36mu extrm{m}$.
