Fibrillation is caused by wet abrasion and occurs during scouring treatments, domestic laundering and wet finishing. So, for clean fabrics, fibrillation must either be prevented or removed after it has occurred. In this study, we researched the influence thickness of tencel on fibrillation occurrence. And the three methods of SEM photograph, reflectance values and gray level values were used in order to present proper evaluation method for fibrillation. The results are as follows. The thickness of tencel was high affected with occurrence of fibrillation, that is, as the thickness of fabrics thicker, the fibrillation occurer. And all method applicated as fibrillation evaluation method very effected without big difference, but they come into be a little question in the side of exactness.