This paper develops a master manipulator which can reflect a force from a slave manipulator effectively. It many have a big workspace, can represent a human operators manipulation perfectly, and is composed of a position control part, an orientation control part and an end effector control part. This paper also develops a graphic simulator using the Visual C++ and OpenGL in the Window operating system. It can be used to make a virtual slave manipulator and set a virtual working environment, and provide a visual information from a desired view point. A virtual teleoperation system is developed by connecting the developed master manipulator to the graphic simulator using an interfacing hardware bilaterally. It is used for performing a virtual object exploration experiment. In the experiment, two virtual objects are used. They are virtual wall and virtual hexahedron which have 0.7N/mm and 2.2 N/mm stiffness respectively. The experiments are performed under six different working conditions. The experiment results will show the effectiveness of the reflected force from the slave manipulator for improving the efficiency and stability of the teleoperation task.