기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
$TiO_2$ 피복 석탄회의 제조와 광촉매 특성에 관한 연구
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • $TiO_2$ 피복 석탄회의 제조와 광촉매 특성에 관한 연구
저자명
유연태,최영윤,김병규,이희정,이병택,Yu. Yeon-Tae,Choi. Young-Yoon,Kim. Byoung-Gyu,Lee. Hee-Jung,Lee. Byong-Taek
간행물명
한국재료학회지
권/호정보
2001년|11권 8호|pp.690-696 (7 pages)
발행정보
한국재료학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

저가형 $TiO_2$ 광촉매의 개발과 광촉매의 활용범위를 확대하고자, 석탄회를 지지체로 이용하여 $TiO_2$ 광촉매를 제조하였다. 석탄회 표면에 $TiO_2$ 입자의 피복은 침전법에 의해서 수행되었다. $TiO_2$의 공급원으로는$ TiCl_4$수용액과 침전제로는 $NH_4$$HCO_3$가 사용되었다. 이들의 중화반응에 의해 석탄회 표면에 생성되는 Ti(OH)4$_4$는 $300~700^{circ}C$의 열처리 과정에서 산화되었다. 여기서 생성된 $TiO_2$의 결정구조는 anatase형을 나타내었다. 피복 $TiO_2$의 결정립 크기는 열처리 온도의 상승에 따라 증가하였으나, NO가스의 제거능은 감소하는 경향을 보였다. $TiO_2$피복 석탄회를 $300~400^{circ}C$의 온도 범위에서 2시간 동안 열처리할 경우, $TiO_2$의 결정립 크기는 약 9nm이었고, 질소산화물 제거율은 85~92%이었다. 또한, $TiO_2$피복 석탄회의 백색도는 $TiO_2$의 피복량이 증가할수록 열처리 온도가 증가할수록 상승하는 경향을 나타내었다.

기타언어초록

$TiO_2$ coated coal fly ash has been prepared in order to develop the low price $TiO_2$ photocatalyst and spread out its utilizing field. $TiO_2$ particles is coated on the surface of coal fly ash by precipitation method. In this method, $TiCl_4$ aqueous solution was used as a titanium stock solution and $NH_4HCO_3$ was used as a precipitant. The titanium hydroxide precipitated on the surface of coal fly ash in these neutralizing reaction process was oxidized by heat treatment in temperature ranges of $300~700^{circ}C$. The crystal structure of the generated titanium dioxide showed anatase type. The crystal size of titanium dioxide increased with raising the temperature of heat treatment, but the removal ability of NO gas decreased. When the titanium dioxide was heated at temperature ranges of $300~ 400^{circ}C$ for 2 hours, the crystal size of titanium dioxide appeared about 9nm, and the removal rate of NO gas showed 85~ 92%. The whiteness of $TiO_2$ coated coal fly ash increased with raising the coating rate of titanium dioxide and the temperature of heat treatment.