기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
각 종 모래의 Stress-dilatancy 관계에 관한 연구
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 각 종 모래의 Stress-dilatancy 관계에 관한 연구
저자명
박춘식,장정욱
간행물명
韓國地盤工學會論文集
권/호정보
2002년|18권 1호|pp.41-48 (8 pages)
발행정보
한국지반공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

공중낙하법에 의해 만든 등방압밀 모래공시 체를 미소변형률 측정장치를 사용한 평면변형률압축시험을 실시하여 미소변형률에서 파괴후까지의 응력-다이레이턴시(stress-dilatancy) 관계를 연구하였다. 세계 각국의 주요 연구기관에서 사용되고 있는 7종류의 연구용 표준사 공시체를 멤브레인의 관입에 의한 오차와 변위를 외부에서 측정함으로 하여 생기는 오차(bedding error) 등의 영향을 제거하여 측정한 최대주응력방향의 변형률과 최소주응력방향의 변형률을 각각 0.0001%에서 파괴 시까지의 응력-변형률 관계를 얻었다. 그 결과 미소변형률 수준에서 파괴 시가지의 주응력비-주변헝률증분비 관계는 과압밀비 및 구속압에 거의 영향을 받지 않고 동일하였다. 또한 미소변형률에서는 이방성이 주응력비-주변형률증분비 관계에 미치는 영향은 거의 없지만, 파괴 부근에서의 K값의 크기는 $delta$에 따라 다른 값을 나타내었다. 한편, K값은 모래의 종류에 따라 다른 값을 나타내었다. 전체적으로 Rowe의 응력-다이레이턴시식은 미소변형를에서 파괴까지 근사적으로 성립한다는 것을 알았다.

기타언어초록

Anisotropy of stiffness, from extremely small strains to post-failure strains, of isotropically consolidated air-pluviated sands in plane strain compression was studied by using the newly developed instrumentation fur small strain measurements, Seven types of sand of world-wide origins were tested, which have been extensively used for research purposes. Stress-strain relationships for a wide range of strain from about 0.0001% to the peak were obtained by measuring axial and lateral strains locally free from the effects of bedding and membrane penetration errors at the specimen boundaries. The result showed that the relationship between the principal stress ratio and the principal strain increment ratio was constant, being rarely affected by the over-consolidation ratio and the confining pressure. Although in the small strain the anisotropy hardly affected the relationship between the principal stress ratio and the principal strain increment ratio, the K value around the peak varied according to the $delta$ value. In general, Rowe`s stress-dilatancy equation works fairly well from the small strain to the peak.