기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
과압밀점토의 간극수압계수에 응력이력과 시간이력이 미치는 영향
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 과압밀점토의 간극수압계수에 응력이력과 시간이력이 미치는 영향
  • The Effects of Stress and Time History on Pore Pressure Parameter of Overconsoldated clay
저자명
김수삼,김병일,한상재,신현영
간행물명
韓國海岸海洋工學會誌
권/호정보
2002년|14권 4호|pp.286-294 (9 pages)
발행정보
한국해안해양공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

본 연구에서는 응력이력과 시간이력이 과압밀 상태에서의 간극수압계수, A(Skempton, 1954)에 미치는 영향에 관하여 실험적으로 규명하였다. 응력경로 회전각, 과압밀비 및 접근길이로 정의되는 응력이력과 재하속도 이력 그리고 정지기간으로 정의되는 시간이력에 따른 간극수압계수(A)의 값과 변화 양상을 보았다. 응력경로 회전각에 따른 간극수압계수(A)는 그 값과 변화 경향에서 상이하게 나타났고, A의 값에 있어서는 과압밀비 의존성을 보였지만, 변화 양상에서는 의존성을 찾아 볼 수 없었다. 접근길이에 따른 간극수압계수(A)는 초기 미소 변형률 구간을 제외하고는 큰 영향을 받지 않았다. 또한, A의 값은 재하속도 이력에 영향을 받았지만, 변화 경향은 모두 동일하게 나타났다. 마지막으로 정지기간에 따른 과압밀점토의 간극수압계수, A는 정지기간의 유무에 따라 변화 경향과 값이 큰 차이를 보이다가 일정 축차응력 또는 변형률을 넘어서면 거의 유사한 값을 나타내었다.

기타언어초록

This study investigated the effects of stress and time history of overconsolidated clayey soils on pore pressure parameter, A. Laboratory tests were carried out under the conditions of both varying stress and time history. The stress history is classified into (i) rotation angle of stress path, (ii) overconsolidation ratio, and (iii) magnitude of length of recent stress path. The time history is divided into (i) loading rate of recent stress path and (ii) rest time. Pore pressure parameters are different both in the magnitude and trend with the rotation angle, depending on the magnitude of overconsolidation ratio but not in a trend. In addition, the pore pressure parameters have no effects on the magnitude of length of recent stress path except the level of initially small strain, while loading rates of recent stress path have effects on it. Finally, the pore pressure parameters of overconsolidated clays increase with the existence of the rest time, until either the deviator stress exceeds 70 kPa or the strain up to 0.1%.