For the convenient use of high performance microprocessor in motor control, peripheral devices are needed for converting its control signals to compatible ones for motor drive. Customized devices are not plentiful far these purposes and their functions do not usually satisfied designers specification. The designers used to implement these functions on FPGA or CPLD using hardware description language. Then, in this case unessential programs are needed for control the peripherals. In this paper, a unified device model that links peripheral devices, including especially the pulse width modulation controller and the quadrature encoder interface device, to an interrupt controller is proposed. Advanced functions of peripherals could be achieved by this model and unessential programs can be simplified. Block diagrams and flowcharts are presented to illustrate the advanced functions. This unified device was designed using VHDL. The simulation results were presented to demonstrate the effectiveness of the proposed scheme.