Attempt was made to establish identification methods for irradiated starch. Commercial starches (corn starch/CS, sweet potato starch/SS, and potato starch/PS) were irradiated at 0-6.0 kGy and used to measure viscosity with Brookfield DV-III programmable rheometer. Starch suspensions were prepared at 8.0 (7.2%, d.b.), 8.5 (7.3%, d.b.), and 9.0% (7.3%, d.b.) for CS, SS, and PS, respectively at 100 rpm in spindle speed. Results showed viscosities of samples significantly decreased (p<0.05) as irradiation dose increased, with $R^2$ 0.9754, 0.9618, and 0.9888 for CS, SS, and PS, respectively. Irradiation dose at 1.5 kGy induced decrease in viscosity as compared to non-irradiated control by 34, 57, and 51% in CS, SS, and PS, respectively, suggesting viscometry could lie applied to identify irradiated starches. Solubility and alkali number of irradiated starches significantly increased with irradiation doses, while swelling power decreased (p<0.05). Results suggested solubility, alkali number, and swelling power for irradiated starches complement identification results of viscometry.