It is not possible to exchange parametric information of CAD models based on the current version of STEP (Standard for the Exchange of Product model data). The designer intents are lost during the transfer of CAD models. To resolve this problem, the macro-parametric approach had been proposed. To enable this approach, a set of standard modeling commands has been defined. Errors or missing elements of the standard modeling commands can be discovered by implementing macro-parametric translators. But there is a limit to discover problems only by using translators. This paper proposes a method to verify the standard modeling commands by implementing a geometric modeler. First, each argument of a modeling command is verified. Second, the set of the standard modeling commands is applied to geometric modeling of commercially available product parts. For the geometric modeling, nine test models have been selected.