The key points of the CTP board is as follows: Film, brightness, plate exposure is eliminated, the reduction of personal expenses, and the reduction of time consumption. But above all, the accurate reappearance of the highlighting and shadow portion as well as self modification of the dust edge portion stands out as the most impressive improvements. In this paper, using a digital test from 4.0 and a Thermal CTP color printing control, the two parts of the Thermal CTP utilized a 1%-99% dot reappearance. Also, using an opposite line target, the results of the CTP plates and printing were compared. Finally, research was made on the printing quality on the slur development of the plate and the result when there was a lack of weave connection.