고가이면서 고기능성 특수고무의 한 종류인 불소고무(Fluororubber) 신재와 폐 불소고무를 고온 전단분쇄기술로 분말화한 재료(recycled FKM)를 다양한 혼합비로 블렌드물을 제조하고 재생재료의 함량에 따른 블렌드물의 가황 특성, 물리적 성질의 변화를 조사하였으며, 이 블렌드물의 열 및 연료에 대한 물성변화율을 측정하였다. 불소고무(FKM) 신재에 고온 전단분쇄 기술로 제조한 재생 불소재료를 $0{sim}50$ phr까지 블렌드하여 각종 물성을 측정한 결과, 재생불소고무의 배합조성이 30 phr인 블렌드물이 저가이면서도 분산성, 내열성 및 내연료유성의 물성변화율이 가장 작은 배합구성으로 나타났다.
Virgin fluororubber(FKM) that is one of the highly-functionalized and expensive special rubber, and recycled FKM that is crushed by high temperature shear-crushing technique from recycled FKM were blended with the various mixing ratio to rubber blends. The cure characteristics and physical properties of these blended rubber compounds were investigated with various contents of recycled FKM and physical properties fur heat and fuels were also measured. Recycled FKM which is prepared by high temperature shear-crushing technique were blended to virgin FKM with the range of $0{sim}50$ phr. The physical properties indicated that the rubber blend of recycled FKM with 30 phr turned out to be the best compound showing good dispersibility, heat resistance and fuel resistance and inexpensive in price.
