기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
강자성 비정질 NiFeSiB 자유층을 갖는 자기터널접합의 스위칭 특성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 강자성 비정질 NiFeSiB 자유층을 갖는 자기터널접합의 스위칭 특성
저자명
황재연,이장로,Hwang. J.Y.,Rhee. S.R.
간행물명
韓國磁氣學會誌
권/호정보
2006년|16권 6호|pp.279-282 (4 pages)
발행정보
한국자기학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

비정질 강자성 NiFeSiB 자유층을 갖는 자기터널접합 (MTJ)에 대하여 연구하였다. 비정질 자유층이 MTJ의 스위칭 특성에 미치는 영향을 알아보는데 역점을 두어 기존의 CoFe와 NiFe층 대신에 NiFeSiB 자성층을 사용하였다. $Ni_{16}Fe_{62}Si_{8}B_{14}$는 $Co_{90}Fe_{10}$보다 더 낮은 포화자화도 ($M_{s}:;800;emu/cm^{3}$) 그리고 $Ni_{80}Fe_{20}$보다 더 높은 이방성 상수 ($K_{u}:;2700;erg/cm^{3}$)를 갖는다. $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe $7/AlO_{x}/CoFeSiB;(t)/Ru;60;(nm)$ 구조는 그 자체의 낮은 포화자화도와 높은 일축 이방성을 가짐으로 인하여 보자력($H_{c}$)을 감소시키고 스위칭 각형을 증가시키게 함으로서 MTJ의 스위칭 특성에 유리한 것으로 조사되었다. 더욱이 미소두께(1 nm)의 CoFe층을 터널장벽/NiFeSiB 경계면에 삽입하면 TMR비와 스위칭 각형이 증가하고 개선되었다.

기타언어초록

Magnetic tunnel junctions (MTJs), which consisted of amorphous ferromagnetic NiFeSiB free layers, were investigated. The NiFeSiB layers were used to substitute for the traditionally used CoFe and/or NiFe layers with the emphasis being given to obtaining an understanding of the effect of the amorphous free layer on the switching characteristics of the MTJs. $Ni_{16}Fe_{62}Si_{8}B_{14}$ has a lower saturation magnetization ($M_{s}:;800;emu/cm^{3}$) than $Co_{90}Fe_{10}$ and a higher anisotropy constant ($K_{u}:;2700;erg/cm^{3}$) than $Ni_{80}Fe_{20}$. The $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe $7/AlO_{x}/CoFeSiB;(t)/Ru;60;(in;nanometers)$structure was found to be beneficial for the switching characteristics of the MTJ, leading to a reduction in the coercivity ($H_{c}$) and an increase in the sensitivity resulted from its lower saturation magnetization and higher uniaxial anisotropy. Furthermore, by inserting a very thin CoFe layer at the tunnel barrier/NiFeSiB interface, the TMR ratio and switching squareness were improved more with the increase of NiFeSiB layer thickness up to 11 nm.