Axiomatic Design has been developed as a general design framework during past two decades and TRIZ has been developed for a design tool over 50 years. Axiomatic design is quite excellent in that design should be decoupled. When a design matrix is established, the characteristics of the design are identified according to the coupling properties. If the design is coupled, a decoupling process should be found. However, axiomatic design does not specifically indicate how to decouple a coupled design. In this research, the coupling manner is classified into six patterns. Each pattern could be solved by an appropriate TRIZ module. A table, which matches the coupling pattern and a TRIZ module, is proposed for effective application of the two design theories. The decoupling ideas are proposed by using TRIZ modules. When the number of decoupled designs is more than one, the engineer should select the final idea. The proposed method is applied to practical cases such as a tape feeder and a beam adjuster of the laser marker.