폐금속 광산 지역 등지에서 중금속으로 오염된 지하수의 정화 및 오염확산 방지를 위하여 투수성 반응벽체를 사용 할 수 있다. 본 연구에서는 슬래그가 투수성 반응벽체 충진물질로서 적당한지 평가하기 위하여 폐광산 지역에서 문제가 되고 있는 몇 가지 중금속(i.e., Pb, Cu, Cd)에 대한 슬래그의 반응성을 평가하였다. 폐광산 지역 지하수에는 중금속류들이 복합오염의 형태로 존재하며, 음이온 물질인 황산염, 탄산염 등도 공존한다. 중금속으로 오염된 현장의 조건을 고려하여, 1) 중금속 종류에 따른, 2) 초기 농도에 따른, 3) 음이온(황산염)의 존재에 따른 영향을 회분식 실험을 통하여 슬래그의 흡착능을 평가하였다. 슬래그의 흡착특성은 등온흡착평형(equilibrium sorption)과 동적인 흡착(kinetic sorption)인 경우 각 조건에 따른 영향을 확인하였다.
Permeable reactive barriers (PRBs) technology can be applied to contaminated groundwater remediation. It is necessary to select adequate reactive material according to contaminant characterization. In groundwater. In this research, the reaction between reactive material and heavy metal contaminants was estimated through batch test. Reactive material was slag, which has been produced in Gwangyang power plant, and heavy metal contaminants were cadmium, lead and copper. Batch test consisted of two testes: 1) sorption equilibrium test and 2) sorption kinetic test. Sorption equilibrium test was performed for estimating slag sorption capacity against contaminants. And sorption kinetic test was performed for slag sorption rate with contaminants species, contaminants initial concentration and sulfate. Sorption capacity and sorption rate were affected by contaminant species. Sorption rate increased with increasing initial concentration in lead and copper but decreased with increasing initial concentration in cadmium. Sorption rate increased in existing sulfate. In low concentration, film diffusion was domain mechanism, and in high concentration, particle diffusion was domain mechanism.
