A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.