The BPF designed by the formula based on strip line shows the center frequency shift and distortion in filter response and this becomes more significant with higher frequency. In this paper, the novel design based on EM simulation is proposed. In the design, the filter is decomposed into individual resonators and, for each resonator, the reactance slope and the inverter values are measured and tuned to desired design values for a inverter BPF prototype. The filter composed with such resonators shows the desired filter response without further tuning. This is because possible effects of discontinuities and dispersion are included in the filter parameter extraction. The method can generally apply to all filters that can be transformed into inverter BPF prototype. The procedure is verified by designing a 5th-order SIR filter and quite general to adapt into the design of a parallel coupled line filter, and hair-pin filter.