셀룰로오스 디아세테이트(CDA)에 가소제로서 트리아세틴(TA)과 에폭시화된 콩기름(ESO)을 첨가하여 고속믹서에서 일차적으로 CDA를 가소화한 후, 여기에 천연 zeolite를 충전제로서 첨가하여 용융압출로 CDA/zeolite 복합체를 제조하였다. DMA 측정을 통하여 가소화한 CDA의 $T_g$는 $106^{circ}C$이며 여기에 zeolite를 50% 첨가한 복합체의 경우는 $125^{circ}C$의 $T_g$를 확인하였다. Zeolite의 함량이 10에서 50%까지 증가함에 따라 탄성률은 1.7 GPa에서 3.6 GPa로 2배 이상 증가하였으며, 인장강도는 62 MPa에서 조금 증가하다가 51 MPa로 감소하였고 파단신율도 10%로 증가하다가 3.2%로 감소하였다. 복합체의 SEM 이미지로부터 CDA와 zeolite의 상용성을 확인하였다. Zeolite의 함량이 증가할수록 더 효과적으로 zeolite가 초산기를 흡수하였다.
Cellulose diacetate (CDA) was plasticized with triacetine (TA) and epoxidized soybean oil (ESO) in a high speed mixer. Composites of plasticized CDA and zeolite were prepared by a melting process. The $T_g$ value, $106^{circ}C$ of the plasticized CDA was confirmed by DMA analysis. The $T_g$ value of the CDA with 50% zeolite was $125^{circ}C$. As the content of zeolite was increased from 10 to 50% the modulus of the composite was increased from 1.7to 3.6 GPa by two times over the plasticized CDA, and its tensile strength was increased to 62 MPa and then decreased down 51 MPa, and its elongation was increased to 10% and then decreased down 3.2%. In the SEM image, the compatibility between CDA and zeolite was observed. Increasing the amount of zeolite in the composites resulted in further enhancement of the $CH_3COOH$ absorption effects.
