This study presents the results of collision and lift analyses of a cylinders-connected protector under stock anchor colliding and dragging. For the analyses, the terminal velocity of the stock anchor was obtained first, and, then, the velocity was used to calculate the falling distance of the stock anchor in air. In addition, two other falling distances were considered for purposes of comparison. From the finite element analyses, using ANSYS, the maximum responses obtained from the stock anchor colliding and dragging were obtained and compared for different collision distances (3, 5, and 8.83 m) and dragging angles (0, 30, 60, $90^{circ}$). Then, the maximum displacements and stresses were discussed, along with the strength and dimensions of the protector. Finally, conclusions were made for the maximum responses.