Comparative analysis of marker efficiency in blouse patterns, based on different sleeve designs, was carried out. Sleeve designs used included set-in-sleeve, laglan sleeve, and epaulet sleeve. The two types of epaulet sleeves, A and B, are based on pattern arrangement methods of center back. Cloth and production conditions are the width of cloth, the number of marking pieces, and the direction for marking deployment. A blouse pattern saved to the PAD CAD System was graded with different sizes and arranged for industrial purpose to calculate the marker efficiency in different conditions. The results were as follows. On the whole, the marker efficiency of small pattern sized set-insleeve was higher than laglan and epaulet sleeve designs. It was also established that marker efficiency is dependent on cloth and production conditions. For small number of marking pieces, efficiency was higher in the condition of 110cm cloth widths compared with that condition of 150cm cloth widths. However the efficiency of large number of marking pieces was higher in the condition of 150cm cloth widths.