본 연구에서는 최근 원자력 발전소에서 이종금속용접 접합 소재로 많이 사용되고 있는 SA 508과 Type 304 스테인리스강의 이종금속 용접잔류응력 분포특성을 살펴보기 위하여 이종금속 용접시편을 제작하여 직접 용접을 실시하고 X-선 회절법을 이용하여 용접시험편의 표면에서 용접 잔류응력을 측정하였다. 또한 3차원 유한요소해석을 통하여 이종금속 맞대기용접을 전산모사하고 시편의 용접잔류응력 분포를 구하였다. 측정한 잔류응력과 유한요소해석 결과 계산된 잔류응력을 고찰함으로써 3차원 평판 이종금속 맞대기 용접부의 잔류응력분포 특성을 살펴보았다.
In this study, the weld residual stress distribution at a dissimilar-metal welded plate of low alloy carbon steel and stainless steel, which are widely used in nuclear power plants, was characterized. A plate mock-up with butt welding was fabricated using SA 508 low alloy steel and Type 304 stainless steel plates and the residual stresses were measured by the X-ray diffraction method after electrolytic polishing of the plate specimen. Finite element analysis was carried out in order to simulate the butt welding of dissimilar metal plate, and the calculated weld residual stress distribution was compared with that obtained from the measured data. The characteristics of the three-dimensional residual stress distribution in a butt weld of dissimilar metal plates were investigated by comparing the measured and calculated residual stress data.
