Dyeing properties of cow leather was investigated with Tumeric powder. The effects of dyeing conditions, mordanting conditions, color change, and color fastnesses were studied. The results were as follows. The dye uptake increased as dye concentration, dyeing temperature, and bath ratio increased. In the effect of dyeing time, the highest dye uptakes showed at 20 minutes and decreased after that point. Pre mordanting was more effective than the post mordanting, and the dye uptakes improved all mordanted fabrics. The highest K/S values showed in pre-Al sample, and the lowest K/S values showed in post-Cu one. The values of Hunter on the samples were more changeable $L^*$ and $b^*$ than $a^*$, and all samples showed Yellow color in Munsell value. But the mordanting methods and mordanting agents were not significant in the color changes. The light fastness of dyed samples showed 1 grade, the dry cleaning and abrasion fastnesses did not improved except post-Fe wet sample.