The saw dust of tropical hardwood, Nyatoh(Palaquium Spp.), was used as a raw material for the preparation of the high valued microcrystalline cellulose(MCC). Three pulping methods, soda pulping, Kraft pulping, and acid-sulfite pulping were applied to obtain cellulose from the saw dust. The residual impurities were removed with the additional bleaching processes: (A) $ClO_2{ ightarrow}H_2O_2$; (B) $ClO_2{ ightarrow}O_3$; (C) $O_3$. For the acid treatment for MCC preparation, the $H_2SO_4$, with three concentration, 20%, 40%, 60% were applied and the effects of $H_2SO_4$ concentration on the properties of MCC were evaluated. The results indicated that the MCC obtained by acid-sulfite pulping followed with $O_3$ treatment and 40% $H_2SO_4$ treatment showed less residual lignin, higher brightness and crystallinity than that of Avicel MCC.