기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
녹차-숯-목재섬유 복합보드의 물리적 특성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 녹차-숯-목재섬유 복합보드의 물리적 특성
저자명
박한민,허황선,성은종,남경한,임재섭,Park. Han-Min,Heo. Hwang-Sun,Sung. Eun-Jong,Nam. Kyeong-Han,Lim. Jae-Seop
간행물명
목재공학
권/호정보
2012년|40권 6호|pp.406-417 (12 pages)
발행정보
한국목재공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

이 연구에서는 선행연구에서 발표된 목재섬유에 녹차를 복합한 친환경 복합보드에 탈취성과 흡착성 등의 기능성을 보강한 건축내장재를 개발하기 위하여, 흑탄, 백탄, 활성탄 등 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 배합비율이 복합보드의 치수안정성, 탈취성 및 포름알데히드 방산량에 미치는 영향을 조사하였다. 녹차-숯-목재섬유 복합보드의 흡수두께 팽창률은 녹차와 숯의 배합비율의 증가에 따라 증가하였으나, 활성탄 함유 복합보드를 제외하고, KS에 규정된 그 값보다 현저히 낮은 값을 나타내었다. 복합보드의 암모니아가스 감소율은 활성탄 10% 함유 복합보드에서 30분 경과시 96%의 높은 값을 나타내었고, 다른 모든 복합보드에서도 1시간 경과 후 거의 95%전후의 높은 암모니아가스 감소율을 나타내었다. 복합보드의 포름알데히드 방산량은 $E_1$급 요소수지를 사용했을 경우, $E_0$급에 가까운 방산량을, $E_0$급 요소수지를 사용했을 경우는 super $E_0$급의 낮은 포름알데히드 방산량을 나타내는 것이 확인되었다.

기타언어초록

In this study, eco-friendly hybrid composite boards were manufactured from green tea, three kinds of charcoals and wood fiber for developing interior materials to reinforce the functionalities such as the deodorization and the absorbability on the green tea-wood fiber hybrid boards in the previous researches. The effects of kind of raw materials and the component ratio of raw materials on dimensional stability, deodorization and emission of formaldehyde were investigated. Thickness swelling of the hybrid composite boards increased with increasing of component ratio of green tea and charcoals, but the values were markedly lower than that of Korean standard (KS) for commercial medium density fiber board (MDF), except for hybrid composite boards composed of greed tea, activated charcoal and wood fiber. Reduction rate of ammonia gas for the hybrid composite boards composed of green tea, activated charcoal and wood fiber showed a high value of 96% after 30 minute from the beginning of the test, and the other hybrid boards also showed a high value of about 95% after one hour. Emission amount of formaldehyde was similar to that of $E_0$ grade in case of using $E_1$ grade urea resin, and was similar to that of super $E_0$ grade in case of using $E_0$ grade urea resin.