기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
고에너지밀도 펠릿제조를 위한 목재칩 반탄화 특성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 고에너지밀도 펠릿제조를 위한 목재칩 반탄화 특성
저자명
이재원,김영훈,이수민,이형우,Lee. Jae-Won,Kim. Young-Hun,Lee. Soo-Min,Lee. Hyoung-Woo
간행물명
Korean chemical engineering research
권/호정보
2012년|50권 2호|pp.385-389 (5 pages)
발행정보
한국화학공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

본 연구에서는 소나무 혼합수종을 이용하여 에너지 밀도 증가, 균일한 품질의 바이오매스 제공을 위해 무산소 조건에서 반탄화를 실시하였다. 반응온도는 240, 260,$280^{circ}C$로 하여 30분 동안 반응시킨 후 반탄화 바이오매스 특성을 조사하였다. 침엽수혼합수종의 반탄화는 무처리 바이오매스와 비교하여 발열량이 향상되었음을 확인하였다. 반탄화 온도가 증가할수록 반탄화된 바이오매스의 탄소함량은 최대 46.55%에서 55.73%로 증가하였다. 반면 수소와 산소의 함량은 각각 6.00%에서 5.87%, 30.55%에서 27.21%로 감소하였다. 반탄화 과정에서 주로 헤미셀룰로오스와 휘발성 물질이 제거되었다.$280^{circ}C$에서 30분 동안 반응하였을 때 최대 발열량 5,132 kcal/kg을 나타냈다. 이것은 처리전 바이오매스의 발열량 보다 약 13% 증가하였음을 나타내고 있다. 중량감소율과 에너지수율을 고려하여 비교한 결과 $240^{circ}C$에서 30분 동안 처리하였을 때 효과적인 반탄화가 이루어졌다.

기타언어초록

In this study, torrefaction of mixed softwood chips under anoxic condition was performed to improve energy density and maintain consistent quality of biomass. Characteristics of torrefied biomass depending on reaction time (30 min) and temperature (240, 260,$280^{circ}C$) were investigated. Torrefaction of mixed softwood chips significantly improved the heating value compared to that of untreated biomass. As the torrefaction temperature was increased, the carbon content of torrefied biomass increased from 46.55 to 55.73%, while its hydrogen and oxygen contents decreased from 6.00 to 5.87% and from 30.55 to 27.21%, respectively. Most of hemicelluloses and volatile compounds were removed during torrefaction. The highest heating value was 5132 kcal/kg when torrefaction was performed at$280^{circ}C$ for 30 min. It implied that the heating value increased by 13% compared to that of original biomass. However, the condition of effective torrefaction was at $240^{circ}C$ for 30 min when weight loss and energy yield was considered.