This study focused on the plane and side drape coefficients of weft knitted fabrics as a function of knit structure, stitch density, and stiffness. Fifteen weft knitted fabrics are produced with five different structures (interlock, single pique, royal interlock, cross miss interlock, and mock royal interlock) and three different gauges (7G, 10G, and 12G). Five knit structures were the application of knit, tuck, and miss stitch on the basis of interlock of the double knit fabric For this purpose, three-dimensional shapes of the draped sample were obtained by using a drapability tester which can record the contour line coordinates of a projected plane drape. Then, projected shapes of the plane and side drape were derived from those three-dimensional ones to review the relationship between plane drape coefficients and side ones. It was found that the theoretical values of plane and side drape coefficients depending on the change of deflection angles fit to their experimental ones. A5 a result of a regression analysis of the relationship between plane and side drape coefficients, the relationship could be expressed as $y=0.5838x-0.0065x^2+9.03{ imes}10^{-5}x^3$. In case of mean of drape coefficient, it was increased according to the rule of that the more tuck and miss stitch overlap. A high degree of correlation was found between stiffness and drape coefficient. The regression equation of drape coefficient($y$) can be represented by $y=y=sqrt[3]{Stiffness}-10.72$.