기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
재유화형 분말수지와 아질산형 하이드로칼루마이트를 병용한 폴리머 시멘트 모르타르의 방청성 및 내구성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 재유화형 분말수지와 아질산형 하이드로칼루마이트를 병용한 폴리머 시멘트 모르타르의 방청성 및 내구성
저자명
김완기,홍선희,Kim. Wan-Ki,Hong. Sun-Hee
간행물명
한국건축시공학회지
권/호정보
2012년|12권 3호|pp.275-283 (9 pages)
발행정보
한국건축시공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

본 연구는 철근 콘크리트 구조물의 장수명화를 위해 고성능 다기능 폴리머 시멘트 복합체의 개발을 목적으로, 우수한 성능을 갖는 VA/E/MMA (Vinyl Acetate/Ethylene/Methyl Methacrylate) 터폴리머 분말수지와 아질산형 하이드로칼루마이트를 병용한 폴리머 시멘트 모르타르의 염화물이온 침투 저항성, 중성화 저항성, 건조수축 및 철근부식 촉진시험을 통하여 그 내구성과 방청성을 검토하는 것이다. 그 결과, 폴리머 결합재비에 관계없이 칼루마이트의 치환에 의해 폴리머 시멘트 모르타르의 내구성이 일부 저하하는 경향을 보였으나, 이는 폴리머 결합재비의 증가에 따라 크게 개선되었다. 방청성의 경우 VA/E/MMA 분말수지 사용으로 시멘트 매트릭스 내 생성된 폴리머 필름에 의한 이온 및 가스투과 저항성 증대와 칼루마이트의 이온교환반응에 따른 염화물 이온 흡착 및 아질산 이온을 방출하는 자기방청기능에 의하여 우수한 방청효과를 보였다. 따라서, 철근콘크리트 구조물의 장수명화를 위해 VA/E/MMA 터폴리머 분말수지와 아질산형 하이드로칼루마이트의 병용에 의해 우수한 방청성과 내구성을 갖는 폴리머 시멘트 복합체의 개발이 가능할 것으로 판단된다.

기타언어초록

Nitrite-type hydrocalumite (calumite) is a material that can adsorb the chloride ions ($Cl^-$)that cause the corrosion of reinforcing bars and liberate the nitrite ions ($NO_2{^-}$) that inhibit corrosion in reinforced concrete, and can provide a self-corrosion inhibition function to the reinforced concrete. In this study, VA/E/MMA-modified mortars with calumite were prepared with various calumite contents and polymer binder-ratios, and tested for corrosion inhibition, chloride ion penetration, carbonation and drying shrinkage. As a result, regardless of polymer-binder ratio, the replacement of ordinary Portland cement with hydrocalumite has a marked effect on the corrosion inhibiting property of the polymer-modified mortars. However, chloride ion penetration and carbonation depths are somewhat increased with higher calumite content, but can be remarkably decreased depending on the polymer-binder ratios. The 28-d drying shrinkage shows a tendency to increase with the polymer-binder ratio and calumite content. VA/E/MMA-Modified mortars with 10 % calumite did not satisfy KS requirements. Accordingly, a calumite content of 5 % is recommended for the VA/E/MMA-modified mortars with calumite.