This study devised and drew custom sleeve patterns by using a regression equation with the data from 7 models along with the sleeve that was slightly modified to make the general-purpose sleeve pattern. To devise a general-purpose sleeve pattern, the sleeve pattern was drawn as an object for comparison by applying the Bunka drafting system (sleeve pattern by the Bunka drafting system) to the basic upper garment. Actual sleeves, made by using the three types of patterns above, were created and tested by models. Next, 30 panel members participated in a sight test of the compatibility of the sleeves to examine the validity of the sleeve drafting method acquired using the regression equation. The test proved that the custom sleeve pattern and the general-purpose sleeve pattern were more suitable for the characteristics of arm structures. Thus, the new sleeve-cap part drafting method using the regression equation was shown to have validity. As a result, since a very significant correlation was obtained for the body measurement figures and the basic pattern of the adequate basic pattern of the sleeves, this study concludes that it is possible to come up with primary data that can be widely used by increasing the number of subjects.