기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
알킬렌디아미노알킬-비스-포스폰산 금속염으로 처리된 리기다 소나무 시험편의 연소특성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 알킬렌디아미노알킬-비스-포스폰산 금속염으로 처리된 리기다 소나무 시험편의 연소특성
저자명
진의,정영진,Jin. Eui,Chung. Yeong-Jin
간행물명
한국화재소방학회 논문지= Journal of Korean Institute of Fire Science & Engineering
권/호정보
2013년|27권 6호|pp.70-76 (7 pages)
발행정보
한국화재소방학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

새로운 4종의 피페라지노메틸-비스-포스폰산염을 합성하였다. 그리고 이들을 가지고 처리된 리기다 소나무 시험편의 연소성을 시험하였다. 15 wt%의 알킬렌디아미노알킬-비스-포스폰산염 수용액으로 리기다 소나무에 3회 붓칠한 시험편은 실온에서 건조시킨 후, 콘칼로리미터(ISO 5660-1)를 이용하여 그의 연소성을 시험하였다. 그 결과, 알킬렌디아미노알킬-비스-포스폰산염으로 처리한 시험편은 피페라지노메틸-비스-포스폰산으로 처리한 시험편에 비하여 그의 연소 억제성을 향상시켰다. 특히 알킬렌디아미노알킬-비스-포스폰산염으로 처리한 시험편은 알킬렌디아미노알킬-비스-포스폰산으로 처리한 시험편보다 각각 낮은 최대열방출률(162.02~145.36) $kW/m^2$과 낮은 총열방출률(73.0~67.4) $MJ/m^2$을 나타내었다. 그러나 알킬렌디아미노알킬-비스-포스폰산염으로 처리한 시험편은 열전도성 증가에 의하여 알킬렌디아미노알킬-비스-포스폰산으로 처리한 시험편에 비해 각각 빠른 착화시간(67~23) s과 짧은 불꽃소멸시간(472~433) s을 나타내었다.

기타언어초록

Four kinds of new piperazinomethyl-bis-phosphonic acid $M^{n+}$ ($PIPEABPM^{n+}$) were synthesized and their combustive properties of Pinus rigida plates treated with $PIPEABPM^{n+}$ were tested. Pinus rigida specimens were painted in three times with 15 wt% $PIPEABPM^{n+}$solutions at the room temperature. After drying specimen treated with chemicals, com-bustive properties were examined by the cone calorimeter (ISO 5660-1). As a result, the combustion-retardation proper-ties were increased by due to the treated $PIPEABPM^{n+}$ solutions in the virgin pinus rigida. Especially, the specimens treated with $PIPEABPM^{n+}$ showed both the lower peak heat release rate ($HRR_{peak}$) (162.02~145.36) s and total heat release rate (THRR) (73.0~67.4) $MJ/m^2$ than those of virgin piperazinomethyl-bis-phosphonic acid (PIPEABP)-plate. Compared with virgin PIPEABP-plate, the specimens treated with the $PIPEABPM^{n+}$ showed low combustive properties. However the specimens treated with $PIPEABPM^{n+}$ showed both the shorter time to ignition (TTI) (67~23) s and the time to flameout (Tf) (472~433) s than those of virgin PIPEABP-plate by increasing the thermal conductivity.