기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
낙동강 실트질 모래의 불포화 전단강도 특성
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 낙동강 실트질 모래의 불포화 전단강도 특성
저자명
김광일,신지섭,박성식,김기영,Jin. Guang-Ri,Shin. Ji-Seop,Park. Sung-Sik,Kim. Ki-Young
간행물명
韓國地盤工學會論文集
권/호정보
2013년|29권 2호|pp.47-56 (10 pages)
발행정보
한국지반공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

포화토의 개념과 원리로는 실제 지반에서 발생하는 현상과 거동이 제대로 해석되지 않는 많은 공학적 문제들이 있다. 불포화토는 부간극수압의 영향으로 겉보기점착력을 보임과 동시에 물의 흐름에 있어서 간극 속에 공기의 함입으로 투수성이 저하하는 등 포화토와는 다른 거동특성을 나타내는 것으로 알려져 있다. 따라서 흙 속의 수분 함량에 따른 공학적 특성을 규명하는 것은 지반강도의 산정, 구조물의 안정성 등을 판단하는데 있어서 중요한 자료를 제공하므로 많은 연구와 노력이 필요하다. 특히, 하천복원 프로젝트인 "4대강 살리기"중 한 곳인 낙동강유역에는 모래 지반이 넓은 지역에 걸쳐 분포하고 있으며, 중소규모의 댐, 홍수조절지, 하천변 저류지 및 저수지 재개발 등 많은 토목구조물이 건설되고 있다. 본 연구에서는 낙동강유역 내 불포화상태에 있는 지반구조물의 설계 시공 및 안정성 검토에 기초적 자료를 제공하고자 낙동강 중하류 실트질 모래를 대상으로 불포화 삼축압축시험을 실시하였다. 시험 결과 최대축차응력은 구속압과 흡인력이 증가함에 따라 증가하는 것으로 나타났다. 또한 점착력은 흡인력의 증가에 따라 비선형적으로 증가하였으나, 내부마찰각은 크게 변하지 않는 것으로 나타났다.

기타언어초록

There are many technical problems, which can not be resolved by the concept of saturated soil mechanics. Unsaturated soils show an apparent cohesion due to negative pore pressure and relatively lower permeability due to entrapped air compared to saturated soils. The determination of engineering properties of soils with various moisture content is very important to evaluate shear strength and stability of natural and engineered soils. So various researches should be made on unsaturated soils. Especially, sandy soils are widely distributed near Nakdong river, one of the four rivers where Restoration Projects were carried out. Many structures such as dams, flood control facilities, detention facilities and reservoirs have been built in this area. In this study, unsaturated triaxial compressive tests were conducted on sands or silty sands at Nakdong river in order to provide their fundamental characteristics for design and construction of geotechnical structures. As a result of the tests, the maximum deviator stress increased as the confining stress and matric suction increased. The cohesion increased non-linearly as the matric suction increased, but the angle of internal friction was marginally changed.