In this paper, the effects of heat treated parameters on the properties of bamboo fiber (BF)/polypropylene (PP) composites were investigated. The crystallization properties of BF/PP composites after heat treatment were characterized by differential scanning calorimetry (DSC), and the mechanical properties were measured. The results showed that the crystallinities of the heat treated composite were enhanced compared with that of the untreated. When the heat treated time was 30 mins, the crystallinities became almost unchanged. However, the crystallinity decreased after 12 h heat treatment. In addition, when the heat treated temperature was above $90^{circ}C$, the higher the temperature was, the higher the crystallinities became. Moreover, the tensile strengths of BF/PP composites increased and then decreased with increasing heat treated time, while the impact strengths had a decreasing trend. In the meanwhile, the tensile strengths increased but the impact strengths decreased as the heat temperature increased.