본 연구는 순환골재에서 발생하는 오염물질의 특성과 오염 가능성을 평가하기 위해 생산제품 순환골재(RA-1)와 현장 순환골재(RA-2)의 용출시험을 실시하였다. 순환골재의 pH, Conductivity, 중금속 함량은 RA-2 보다 RA-1이 높게 나타났다. 용출시험결과, 순환골재로부터 용출되는 오염물질은 입경이 작을수록 높게 나타났다. 순환골재의 pH는 9.0~12.3으로 강알칼리성으로 나타났고, Conductivity는 10mm 이하에서 높게 나타났다. 중금속은 KSLT의 용출기준을 만족하였고, 순환골재로부터 약 10% 이하로 용출되었다. 순환골재의 수질 오염 가능성을 평가한 결과, 오염 가능성이 매우 높은 항목에는 pH, 오염 가능성이 낮은 항목에는 Conductivity, Turbidity, 오염 가능성이 매우 낮은 항목에는 중금속으로 나타났다.
This study was on leaching test(KSLT, TCLP) of the aggregate for the products(RA-1) and for the site(RA-2) to evaluate the characteristics of contaminants and the possibility of contamination arising from the aggregate. On the basis pH, conductivity and heavy metal contents in the aggregate, RA-1 indicated higher than RA-2. As a result of the leaching test, the pollutants were eluted from the aggregate increased as the particle size of the aggregate was smaller. The pH in the aggregate had a strong alkali by a pH value of 9.0~12.3, the conductivity was higher in less than 10mm RA-1 due to the leaching of dissolved inorganic ions. The heavy metals satisfied the leaching standards of KSLT and less 10% was eluted from the aggregate. As a result of evaluating water pollution possibility of the aggregate, the pH displayed in items with a very high possibility of contamination, conductivity and turbidity did in item with a low possibility of contamination and on the other hand the heavy metals did in item with a very low possibility of contamination.
